Worn tires can be used in the garden making them compost bins, borders and round the garden. All you need is just to properly cut a tire.
Production of borders
To make the border fence for garden beds or lawn, you need to cut the tire bumpers. For this purpose, the transition between the sidewall and the projector must be done through an incision.
Then it is inserted into the knife with a large blade, and a side cut in a circle. The movement should go up on himself. In this case, the rubber will not be clamping the knife.
Cut both sides, you need to remove the protector.
Thereafter, the resulting wrap is cut across the tape. Because rubber has a cord, then a cross-dissolving is performed by the grinder or a hacksaw.
By making a sufficient number of such tapes, they can protect garden beds, garden path, lawn, etc.
The preparation of compost bins
For the fabrication of compost barrels need to be cut off from several tire sidewall, and remove them from the hoops. Then placing the barrel in the ground temporarily driven into 2 columns. The distance between them should be slightly smaller than the diameter of the tire. Due to this, they will be able to support the hoops.
Between the columns is placed the first Hoop and setremoveall mass for compost.
Then the top is installed as the wrap and also press-fitted weeds, leaves, etc. To the fertilizer was ready by the autumn, it is desirable to pour on top of the latest Hoop a bucket of finished compost. Living bacteria in it is quickly processed fresh laid below ground.
In the centre of the barrel formed with a crowbar breaks through the hole to the bottom. It is inserted into the plastic tubing with the perforation. It will provide access of air to all layers of the processed mass.
Further support posts can be pulled out, as hoops are held pressed between them and without them. The mass did not dry up, the barrel is better to wrap with plastic wrap. Because at the top of a finished compost, you can plant a pumpkin. It will grow and produce a crop at a time, until the green mass beneath it is processed.
Manufacturer of round beds
Same hoops, that under the barrel, can be used as a round the beds. They’re stuffed with compost, then planted cucumbers, squash, greens, etc. due to the fact that the roots of the plants will be located in black on the sun heated the tire, the harvest will gather a little earlier than simply landing in the ground.