Glass bottles can make a lot of interesting things for the house — for example, glasses or ashtrays. But for this, you will need to make a simple device — the strand.
For this we will need a plank of plywood, aluminum profile (rail), four rubber roller with mounts and glass cutter.
The first thing to fasten to the base side and end thrust wall. On the side wall (top) fasten the aluminium profile. Then fasten to the base of the rollers.
See also: how to make a fixture for cutting plastic bottles into strips of different widths.
In the next phase of the pieces of the wooden bar make the carriage which can be moved along the rail. It is fixed with wing nuts.
Install the carriage on the aluminum profile, and then attached it to a wooden block with a glass cutter.
To work with this device very simple. On the rollers put the bottle, then put the caret in the desired position and pressed against the bottle with a glass cutter. Rotating the bottle, do RES.
Then heated the bottle in the cutting construction dryer and pour water. The result is two parts of the bottle with a smooth cut.
See also: how to make wing bolts and nuts made of plywood in a home workshop.
Read more about how to make strand with your hands and cut with it a bottle, you can see in the video below. This review was prepared on the basis of videos from YouTube channel Made Simple.