In this review, the author will share with us the idea of how do you make a metal frame with adjustable stands for hammock. This design would be appropriate in a country house, and in the yard of a private home.
For the frame we will need specialized and round metal tubes as well as threaded rod, metal pieces and bolts with nuts.
First of a shaped tube, the author welds the base of the frame. The edges to the pipe profile need to weld metal plates with holes (“ears”) for mounting racks.
If you decided to do arrangement of a suburban area, I advise you to read how to do the hands of a collapsible outdoor shower at the cottage.
Rack frame made of round pipes only need 4 pieces. Cut them to size. Then you need to bend the billet on one side, and to the other side (to the end) to weld washers.
In the next stage with the help of bolts and nuts fasten the stand to the base. In the upper part, the fastening of each pair of stands with metal plates.
Then cut two pieces of round pipe and two threaded rods. Insert the studs into the pipe and ovarium.
On the studs, put on a metal plate, fixing them on both sides with nuts. Then weld these plates to the rails of the uprights.
The lower part of the tubes should be welded to the base. Therefore, the angle of the racks can be adjusted.
In conclusion, fasten the hooks so you can hang a hammock, we clean the metal with a grinder (in the welds) and paint.
Read more about how to make a metal frame with adjustable stands to hammock, watch the video below. This idea was shared by YouTube channel khám phá và sáng tạo.