Every day you have to face various technical difficulties, many of which can be resolved by conventional PET bottles. This is, firstly, allows you to cancel the purchase of special tools, parts or devices, and secondly, good for the environment, as used in the case of plastic out of landfills.
Option 1: Repair of telescopic rods
When you use a cheap telescopic fishing rods, you can face the fact that her cap falls off. As a result, the composite tube falls out when the rod is folded. To solve the problem, it is enough to cut the PET bottle neck. Then it is put on the bottom of the rod sits and the construction of a hair dryer or boiling water.
Neck uzhmetsya and get a neat plug. If the regular cap of the rod is preserved, the bottle can also serve as a box for storing spare hooks and leads.
Option 2: the Drain hose with a pear
When you want to drain through a hose the gasoline or other liquid, which is absolutely impossible to get into the oral cavity, it is possible to make a plastic bottle bag for suction.
For this cap it reams the hole slightly smaller in diameter than the hose. The same hole is in the bottom. Then the lid is put the end of the tube.
Then by placing the free end of hose into liquid, is necessary to lower the bag below the level of the tank, squeeze the bottle and press with your fingers a hole in her bottom. Then the pear is released. Due to the impossibility of access of air it sucks in fluid along the tube. Now if you remove your finger, the liquid will flow by gravity.
Option 3: head for the sink
If you want to collect water in a bucket, but the size of the shell and the height of the mixer does not allow to frame him, to get out of the situation by the lake. This takes the bottle and on the side it is cut a big hole.
Cut a bottle without a lid is inserted under the stream of water from the faucet, and the water on it flows over the sink in the filled bucket. This way is much better traction on the faucet hose, eliminating the risk of scratching, and wipe the bathroom fixtures.