DIY

How to pull tightly hammered into the ground a piece of pipe

Как вытащить наглухо забитый в землю кусок трубы

In this review, the author will share a simple way, especially without straining, you can pull tightly hammered into the ground a piece of pipe with a length of over 50 cm.

This method is good because you don’t have dig around the pipe with a shovel — much easier, still live in the 21st century.

We will need a rack and pinion Jack, a piece of steel cable and an electric drill or screwdriver.

See also: how to make the attachment on the trimmer that will be better than the factory coils out of the plastic. It is possible to allocate two basic advantages: the production costs are minimal (the parts you can find in the garage), and it will last a lot longer.

Milestones

The first step in buried pipe will need to drill a hole with a drill or screwdriver. Then in the hole extending the steel cable.

Как вытащить наглухо забитый в землю кусок трубы

Как вытащить наглухо забитый в землю кусок трубы

Well and further all is very simple: set next to a rack and pinion Jack, cling to a rope for lifting a paw, and slowly pulls the pipe out of the ground.

Как вытащить наглухо забитый в землю кусок трубы

Quickly, simply and without any excessive physical effort. So take their way — may someday be useful.

Как вытащить наглухо забитый в землю кусок трубы

Details on how to pull tightly hammered into the ground a piece of metal pipe you can see in the video on our website. The idea proposed by the author of the YouTube channel “Micah Nevosad“.

And as you would do in this situation? If you have experience — share with readers (and with us too) in the comments.

Source:

sdelairukami.ru

Show More

Related Articles

Leave a Reply

Your email address will not be published. Required fields are marked *

Back to top button
Close

Please disable your ad blocker

We know you are here for the stories. Not the ads. But we need the ads to keep the lights on. So please whitelist Buzzon.live.