In the New Year everyone wants to decorate his apartment with new decorations, which would bring new emotions and unforgettable Christmas mood. From decorations, store-bought, not so much fun, how much jewelry you made with your own hands.
The human imagination is limitless in terms of diys and one of them is the beautiful Christmas wreath that consists of many of the winter elements. This wreath during the Christmas holidays will decorate your door and will give rapture to every guest.
To assemble a Christmas wreath we will need the following material:
- Corrugated cardboard 30×30 cm;
- A4 sheet – 10-12 PCs;
- Jute fabric 50х30 cm;
- Paper adhesive tape;
- Braid with POM-poms;
- Silver sequins;
- Bump – about 20 PCs.;
- Jute thread;
- Rattan balls – 5 PCs.;
- Spruce twigs;
- Decorative sugar berries on the wire;
- Ribbon for bow (silver and transparent).
And the following tool:
- PVA glue;
Instructions for making a Christmas wreath at home
From cardboard cut out a circle of outer diameter 30 cm inner 20.
Take the A4 sheets and crushed them in length. Take 2-3 crumpled sheet and primative their paper with tape on one side of the cardboard circle, to form a soft surface.
Burlap fabric cut into ribbons of 5 cm and begin wrapping the future of the wreath after each turn applying the glue on the place where one strip overlaps another.
Next, glue the braid with POM-poms on the outer and inner edge of the wreath.
Take the wool size of 10 by 10 cm, a folded envelope and start, not much pulling together, sew with a needle that would make a smooth lumps like snow.
Next on the ball evenly over the entire surface apply PVA glue and sprinkle with glitter. Allow to dry. Do these snowballs about 20 pieces and varnished.
Now you need of the jute thread to make a loop by which to hang the wreath. Fold the thread from the jute in half, put on her wreath and skip the two ends of the thread through her crease, gently tighten and make this place a DAB of glue. Threads on the inside of the wreath to make at the distance of 4 cm from each other. Two threads on the ends of the join node, the extra cut.
At the outer contour of the cones and glued the snowballs to the sequence of three in one.
Inside the circle of cones with snowballs on or adjacent to the glue evenly five rattan balls between them on a cotton ball. On the same circumference in free space sticking the cones. Still space for one more circle. Again, evenly glue the remaining snowballs in between the bumps.
Cut spruce twigs with a length of 4-5 cm and pasted them into a large free space.
The berries have leave 2 cm wire, bites off the rest. Apply glue on the wire and stick the berries in the place where the most visible jute fabric.
Ribbon make a beautiful bow, it rewinds jute thread, cut off the excess. Do the same on the second bow is smaller. Glue a small bow to the great.
Carefully apply the adhesive behind the big bow in the place where it is fixed with thread and glue to wreath near hinge, rather strongly pressing.
Look if all looks beautiful where you need to straighten the ribbon if they are not symmetrical – cut. Doing the final touch to glue another cone in the middle of the bows.
The wreath is ready and it looks really chic! You can go to decorate your door, be sure the main and from the outside, what would this creature bring good mood and appreciated by as many people as possible!