When you need to replace a burned out light bulb, clean the cobwebs from the ceiling, remove the tulle or curtain with ceiling cornice, usually have to run for the ladder in the utility room or garage.
Someone just climbs on the stool, but it can be unsafe. However, there’s an alternative — you can use as an assistant to a homemade folding chair.
Flick of the wrist chair-transformer turns into a handy ladder with steps with which you can perform all the above steps. Agree that it’s convenient?
We recommend you also read: how to make outdoor stairs out of metal with steps made of tiles.
For the manufacture of folding chairs-ladders will use proftable for the frame and plywood (or, for example, DSP) for the skin. You can also use regular boards.
First, cut blanks of the desired size of potrubi. You then need to weld the front legs and back supports with legs for the back. Connect them with a jumper at the top.
Further, from the profile smaller make step. Weld them to the previously assembled elements of the framework. Also weld the seat base. All seams trimmed with a grinder.
In the next step we connect the two parts of the frame using hinges. Also, you will need to fasten the latches on the sides.
After that, a metal frame sheathed with plywood sawn off the plank for steps and seats with the back, and fasten them screws.
Then it remains only to glue rubber pads to the base of the legs and stick the rubber strip on the upper back, which when unfolded the chair is also in contact with the floor.
Details on how to make a folding chair, a ladder, look at the video below. This review was prepared on the basis of videos from YouTube channel Los Bestauradores.