This review will show you how to make your own hands an original chair made of broken tiles and grout. The basis of the crafts will serve the old plastic chair.
First, using the grinder, the author carves a hole in the seat of the plastic chair. Legs wrapped steel (knitting) wire.
I take this opportunity to share with you another interesting variant of the makeshift chair, which is suitable for relaxing in the yard, and working in a home workshop.
For making this original chair will require the Board pitrova and automobile spring.
Then wind the wire back plastic chairs. On the legs put on plastic tubes — they too will need to wrap the wire so that the solution is better kept.
Cut and bend four metal rod with a letter “G”. The lower part of the rods inserted into the plastic tube and the top fixing on the chair seat.
In the next stage, the author knead the cement slurry of varying consistency. The liquid solution is poured into plastic tubes (chair legs), and thick — daubed outside.
Then you need to prepare pieces of ceramic tile. Performed the seat trim and backrest of the chair. Leave to dry the solution.
Putty for the seams between tiles the author has prepared from white cement, mixed with water. Apply the putty to the surface of the seat and backrest, then remove the excess with a cloth.
In the end there will be only sanded the legs of the chair, and paint them. Also, you will need to paint the back side of the back and the bezel around the seat.
Details on how to make a chair out of cement and ceramic tiles, you can see in the video below. This idea was shared by YouTube channel Penpen 1 vn.