For a quality tile are sometimes difficult to do without special tools. And one of these devices is a reverse hammer. They are especially convenient to use when working with large tiles.
To do the reverse you can hammer with his own hands from scraps of scrap metal that can be found in almost every garage (workshop).
If you constantly have to work with tiles, then perhaps you’ll appreciate another improvised device and copying the template.
You must first prepare the main parts of the structure. From a piece of metal, the author carves out four plates (two narrow and two a little wider). Also cut out and other preparations.
In the next step cut a piece of shaped tube. Weld the slider (let’s call it the firing pin), which will move along the pipe. To him weld a mount for the handle from the grinder.
To the end shaped tube will have to weld a metal plate cut earlier. To the other end of potrubi weld a piece of angle that will strike the firing pin of the hammer.
To the bottom of the area using double-sided tape, the author sticks a piece of rubber to not scratch the tile surface.
Now it remains only to paint our home and get to work. As you can see, the device is quite simple and to make it possible for everyone.
Detailed process of manufacturing a reverse hammer to the tiles you can see in the video below. This review was prepared on the basis of videos from YouTube channel G Smol.