DIY

The livery on the glider Volantex 759-3 2400 2400 mm and Phoenix 2000

Ливрея на планер Volantex 759-3 2400 2400 мм и Phoenix 2000Bought a couple of planes of this company. Loved the performance, strength and for stable and easy flight. It is clear that not match type options superliner. But as the first aircraft for flight training in gliders are very suitable. Durable, simple and almost impossible to kill options. They practiced a variety of customization options, controls and mixes.
YES….what I separated, not actually wanted to tell. The airframe is almost white and beautifully in the sky not too readable. Stickers are applied to these planes I don’t like, both in design and in performance. From heating in the sun and rare of rubs with a cloth from dust and traces of pot which sits in a clearing, trying to start to come off especially on thin and long ends of the picture.
Ливрея на планер Volantex 759-3 2400 2400 мм и Phoenix 2000I prefer your own design using acrylic paints and even fluorescent, not afraid of the word.
The Project Volantex 759-3 2400
Examined most and white samoletik scale 2400.
Ливрея на планер Volantex 759-3 2400 2400 мм и Phoenix 2000Ливрея на планер Volantex 759-3 2400 2400 мм и Phoenix 2000Ливрея на планер Volantex 759-3 2400 2400 мм и Phoenix 2000Strips and hands have become boring, the decision came for morning coffee with pechenegam.
Ливрея на планер Volantex 759-3 2400 2400 мм и Phoenix 2000Ливрея на планер Volantex 759-3 2400 2400 мм и Phoenix 2000Let it be flowers. Copied the pattern cut out marking stencil from heavy paper.
Places of drawing a very thorough wipe down with alcohol. Since the surface of the foam there is some chemistry, maybe it is used for casting parts that the foam did not stick to the form.
Then place a stencil and mark out very gently, with a soft pencil 8B.
Ливрея на планер Volantex 759-3 2400 2400 мм и Phoenix 2000Ливрея на планер Volantex 759-3 2400 2400 мм и Phoenix 2000Ливрея на планер Volantex 759-3 2400 2400 мм и Phoenix 2000And the tail is also a flower close up.
Ливрея на планер Volantex 759-3 2400 2400 мм и Phoenix 2000Picked up a bunch of colors, I will think about a General color solution. At the same time and brushes I tried, which is better suited for the application of this variant pattern. This is not to paint stripes, flowers more difficult.
Ливрея на планер Volantex 759-3 2400 2400 мм и Phoenix 2000Ливрея на планер Volantex 759-3 2400 2400 мм и Phoenix 2000Ливрея на планер Volantex 759-3 2400 2400 мм и Phoenix 2000Start with the lightest, yellow. It is not strange, but the first layer should be applied slightly diluted paint, and carefully paint over the picture box. it penetrates into small bumps and cracks, where the foam quite a lot. After drying, the second layer is well anchored on the surface. Fluorescent paint has a small hiding power, that is, does not cover the surface of the pasty, like tightly. So you need to apply a lot of layers, a little diluted paint in different directions. If you smear a thick layer, visible traces of the brush. in the painting airbrush the paint even more.
Yellow turned four layers.
Ливрея на планер Volantex 759-3 2400 2400 мм и Phoenix 2000Ливрея на планер Volantex 759-3 2400 2400 мм и Phoenix 2000Ливрея на планер Volantex 759-3 2400 2400 мм и Phoenix 2000Ливрея на планер Volantex 759-3 2400 2400 мм и Phoenix 2000Turn to red.
This paint is even worse for coating, it came out to 6 layers of openwork.
Ливрея на планер Volantex 759-3 2400 2400 мм и Phoenix 2000Ливрея на планер Volantex 759-3 2400 2400 мм и Phoenix 2000Ливрея на планер Volantex 759-3 2400 2400 мм и Phoenix 2000Ливрея на планер Volantex 759-3 2400 2400 мм и Phoenix 2000Ливрея на планер Volantex 759-3 2400 2400 мм и Phoenix 2000Ливрея на планер Volantex 759-3 2400 2400 мм и Phoenix 2000Ready all photos in the shade and in the sun.
But the filter on the matrix camera cuts away part of the spectrum and fierce yellow and red not as sharp in the picture.
Ливрея на планер Volantex 759-3 2400 2400 мм и Phoenix 2000The first test flight was quite successful. But the picture is not impressed.
Returned to modelco, had turned over a drawing of your favorite spirit. the deep black.
It was the most difficult operation. Was turned over the transfer table, tassel, long hair to make a thin enough line at the beginning and sharply expanding at the end of the picture. All the lines stroke with a variable cross section made in one action.
Ливрея на планер Volantex 759-3 2400 2400 мм и Phoenix 2000Dragged on the grass for a photo shoot.
The picture turned out much better.
Ливрея на планер Volantex 759-3 2400 2400 мм и Phoenix 2000Ливрея на планер Volantex 759-3 2400 2400 мм и Phoenix 2000Ливрея на планер Volantex 759-3 2400 2400 мм и Phoenix 2000Ливрея на планер Volantex 759-3 2400 2400 мм и Phoenix 2000And one more time rolled on the airfield. Fly from the heart.
Ливрея на планер Volantex 759-3 2400 2400 мм и Phoenix 2000Flew, all good and highly visible. Was that okay little project.
The smallness of the muzzle in the clearing meters for five plus seconds per meter.
This glider is finished.
Turn to the second.
Phoenix 2000.
Beautiful little white airplane.
Ливрея на планер Volantex 759-3 2400 2400 мм и Phoenix 2000In this project went through the standard path, assembled, set up, flew.
A small video of the first flight.
The brake on the engine is not yet up, and waved a screw in flight, did not develop counter flow.
YES….Something distracted in this project decided biomechanical picture to close up. Small ascetic on a piece of paper, then increased the cut marking stencil. Thin liquid and had wing to fix the needles. Yeah, I missed of course wiped with alcohol all the places of drawing. Swept with a soft pencil.
Ливрея на планер Volantex 759-3 2400 2400 мм и Phoenix 2000Ливрея на планер Volantex 759-3 2400 2400 мм и Phoenix 2000Ливрея на планер Volantex 759-3 2400 2400 мм и Phoenix 2000Ливрея на планер Volantex 759-3 2400 2400 мм и Phoenix 2000Then yellow and deep black with transfer table on the contour.
Ливрея на планер Volantex 759-3 2400 2400 мм и Phoenix 2000Ливрея на планер Volantex 759-3 2400 2400 мм и Phoenix 2000On the meadow to fly a glider.
Ливрея на планер Volantex 759-3 2400 2400 мм и Phoenix 2000The livery looks great on the snow, and even reflex.
Ливрея на планер Volantex 759-3 2400 2400 мм и Phoenix 2000Ливрея на планер Volantex 759-3 2400 2400 мм и Phoenix 2000Suddenly summer came, added to the picture of the red on the wings and on the tip of the tail, more visible in the thick grass.
Ливрея на планер Volantex 759-3 2400 2400 мм и Phoenix 2000Ливрея на планер Volantex 759-3 2400 2400 мм и Phoenix 2000Ливрея на планер Volantex 759-3 2400 2400 мм и Phoenix 2000Try to sit down with the flaperons in a strong wind. Swells dramatically glider, need more mixes on Elevator, must press down when the flaperons are lowered.
Flights continue!
Glider although not a real “soaring leader”, great school Desk!
Worked out the settings on landing, hovering, takeoff.
Set up for all sorts of switches and mixes.

Source:

usamodelkina.ru

Show More

Related Articles

Leave a Reply

Your email address will not be published. Required fields are marked *

Back to top button
Close

Please disable your ad blocker

We know you are here for the stories. Not the ads. But we need the ads to keep the lights on. So please whitelist Buzzon.live.