Often after the repair work, namely, during the docking of the ceiling moldings, seen beautiful the gap between the baguettes. This happens due to the use of a wrong method of splicing baguettes, or not knowing how to do it.
In this article we will examine a method in which will require a minimum of time works, so no gap to bridge the gap between skirting using a mitre box. This method is suitable for any corner that forms the wall: sharp and blunt.
In order to understand how to do this, we need two baguette that will be docked.
When docking you will use the following tool:
- An x-ACTO knife.
Instructions for the joining of the ceiling moldings to the outside corner without a miter box
Take one baguette and leans against it with one side of the wall, draw a line in the location where approximately will be the joint.
Similarly with the other baguette draw another line.
We have formed a crosshair, which will converge the two of the plinth.
Draw a dot on the corner of the wall is maximum in the middle, which will connect baguettes.
Now we need to move the projection of the intersection on both a baguette. This again applied alternately both the floor and do each two tick marks on the trajectory of the slice: one where the crosshair on the ceiling, the other on the wall.
Cut as evenly as possible baguettes for applying notches.
Apply the processed baguettes strictly drawn lines; see perfect contact.
Fix the moldings on glue or putty, erase visible pencil line and calmly continue a quality repair.
- Will significantly reduce your repair time;
- Does not require any special tools;
- Is carried out only with pencil and knife;
- And finally: very effective!