In this review, the author will share his experience of building a summer shower — will do it on wooden stilts.
As piles the author uses the Board. At the top of the piles it is necessary to cut a notch that will fit the bottom rail of the frame (crossbars).
Using a garden drill make holes for piles. Themselves piles treated with antiseptic and set in the holes. Piles and beams expose on the level.
You may also be interested to know how to build a country toilet with their hands.
Further, from the boards, collect the frames of the walls of a summer shower. Because the master decided not to use sheet materials (plywood, OSB) for wall cladding, it is necessary to strengthen frameworks alosinae.
One cosine on each wall would be sufficient, as the structure are small, and will not experience any serious load.
After the installation of the wall fastening them together to make a monolithic and rigid structure.
You can then go to the manufacture of the slab floor. To do this, the author decided to use the Board 40х90 mm. Set boards on edge, nailed with nails. The step between the planks — 30 cm
Paul also made of boards. Between them you have to leave gaps through which water will go under the base of the structure. Joists for floors treated with antiseptic.
In the next stage, the author proceeds to build the top cord. Her fasten joists to which you will install the water tank. Capacity better painted black so the water in it heated up faster.
The roof also make for frame technology. As roofing, the author decided to use plastic wrap. The interior walls are also sheathed with film, outside waterproofing.
Only then will fabricate and install doors. They are also sheathed on two sides with plastic wrap and waterproofing. So in the end-mounted water supply system of polypropylene pipes.
Details on how to build an outside shower on wooden stilts, can be seen in the author’s video. Video source — YouTube channel IGOR POTTER pictures.