In 2017, the company Tesla announced its own development of the electric pickup, as usual, with unique characteristics. And this year, November 21, the whole world could see the presentation of this car, which was one of the founders of the company Ilon Musk.
TESLA CYBER TRUCK today has a unique design, unusual for our roads. Some call it the car of the future, some are skeptical about the idea of such futuristic forms on our roads. Anyway, today we offer to make a reduced copy of the car from the conventional corrugated cardboard, and try it out on the road. Ready? So let’s start!
For those who have grown from childhood and repairing these cars it is recommended to visit the site http://a-ride.ruwhere to purchase air suspension for commercial vehicles.
Features geared mini-motors
- Name: geared motor (Gear Motor);
- Housing material: plastic;
- Working voltage: 3 To 12V DC (recommended operating voltage of 6 to 8 in.);
- No-load speed: 1:48 (eg. 3);
- Load current: 70 mA (250 mA max. at eg. 3);
- Size: 7 cm x 2.2 cm x 1.8 cm / 2.76 x 0.87 x 0.71 “(approx.).
- Corrugated cardboard;
- DC 3-6V Plastic mini electric geared DC motor for model – 4 PCs;
- Pair of wheels – 2 PCs;
- Battery compartment for 4 AAA battery or AA;
- Micro switch double pole;
- Soft copper wiring;
- Film to simulate the glass and headlights.
- Soldering iron;
- Hot glue gun with rods;
- Knife painting or prototyping;
- Superglue or PVA.
Instructions for making layout of the TESLA CYBER TRUCK with their hands
Case our model is fully hollow and opaque. In the car will be missing the seats, trunk and control panel. Make a pattern of the body on cardboard, cutting out parts painting or breadboard with a knife. Clippings under the wheels calculated based on the size of the available wheel pairs.
To contacts mini-motors solder wiring, spitted on the axis of the wheel.
On the bottom panel, the bottom of the car, do the cutting under the wheel pair. Using a hot-melt adhesive plant in place of motors with wheels, bringing the wiring inside the car.
Cut and glue the side walls of the car. In the middle of the bottom cut a rectangular slot under the battery compartment, which is fastened with hot-melt adhesive. On both sides of the compartment, make a few holes for the wiring.
Contacts engines wheelset parallelism, joining the ends by soldering. The common wiring from the engine supplied to the battery compartment contacts. The side of the body mount and double pole micro switch, primaeva it to the contact group of the battery compartment. To the side walls of diocleinae glass.
The filling is super-Kara ready. Cut out of cardboard mud flaps under the wheels, and glue them on the inside of the hull with glue.
A truncated form of the body is cut to complement the front, rear wall and car bumpers. On the outside of the wheels, glue the wings and body armorum laminated Kraft paper on the glue or PVA.
Construction is almost complete. Color film, or glossy paper cut out of the lining of the Windows and headlights.
The model is ready to test drive. Interestingly, the form does not prevent movement, even with the tortuous and relief roads. And you make such a simple and interesting model of a unique super car. And your child it certainly will be appreciated.