In this review, the author decided to use a trim sheet metal to make a portable box for storage of hand tools.
First determined with the size of the box — for convenience, you can draw a simple drawing on paper. Then cut blanks out of sheet metal and make a box.
Portable storage box tool and various tripe can be made also from plywood.
Further, from cut sheet metal, you need to make the lid for the box. It is attached to the box using hinges. If there is no loop of suitable size, you can do it yourself.
In the next phase of round steel rod, the author makes the handle. Fasten it to the lid of the box with two metal plates, as shown in the photo below.
Cover will be recorded using a padlock. Weld the necessary parts, clean welds.
Only then will weld inside a partition. In the end we get two branches.
If necessary, weld additional partitions to make more compartments (eg, if you store in the box hardware). After that we clean a metal grinder with a flap around and paint.
How to make your own hands portable metal box for tool storage, details shown in video. This idea was shared by YouTube channel JJ Herreria Y Mas.