If you want to install on window removable mosquito net, its frame can be made of plastic cable channels. This stuff is at any hardware store, is cheap, and is non-corrosive and needs no painting. Due to the presence of cover to fill the grid in a cable channel is very simple, so the Assembly will not take much time.
- mosquito net;
- the cable channel;
- a pop rivet;
- frame corners – 4 PCs.
The process of manufacturing mosquito nets of cable
The cable channel cut into the workpiece 4 according to the size of an opened sash window. Then you need to remove from the blank cover and assemble the channels into the frame using the frame window corners. For this purpose the rails and apertures, and the corners are attached to the rivets.
Further the frame fits a mosquito net and snaps covers the cable channel. First, install one cap, then the mesh is lifted and latched the opposite. Then the side is inserted and after stretch mesh remaining. The protruding part of the mesh neatly trimmed.
Handles for mesh can be made of strap or rafters. They are fixed on the frame cover side with two rivets.
Frame with a mesh is installed on the window side angles out, in this case it will be able to fit snugly to the window. After assembling the frame of the mesh will be invisible outside the window frame, so the design looks like and purchase.