DIY

How to make a hydraulic press vise from Jack

Как сделать гидравлические пресс-тиски из домкрата

In this review, a detailed look at how their hands to make a hydraulic press vise from the bottle of Jack.

Thanks to its compact size and versatility, homemade will definitely be useful in a home workshop and garage.

The jigs can be used as an ordinary bench vise, and also as a mini hydraulic press.

Как сделать гидравлические пресс-тиски из домкрата

You may also like another garage idea, how to make a versatile desktop stanochek for working with metal workpieces.

Produce guides

The first thing you will need to make guides that will “ride” the movable clamping sponge press vise.

Cut two piece of metal pipe of the desired length. Then to the ends of the weld on square plate with holes (the holes are threaded).

Как сделать гидравлические пресс-тиски из домкрата

Как сделать гидравлические пресс-тиски из домкрата

The corners of the plates to be cut, then processed them on the grinding machine that the edges were flush with the tube.

Как сделать гидравлические пресс-тиски из домкрата

Next, from the steel round pipe with a larger diameter cut two sleeves. Put them on the rails.

Как сделать гидравлические пресс-тиски из домкрата

Milestones

As of the frame the author uses the channel. One butt weld another piece of steel channel, to the other a piece of metal plate. They drill the mounting holes.

Как сделать гидравлические пресс-тиски из домкрата

One side guides are attached to the end channel and the other to the segment of the area (see photo below).

Как сделать гидравлические пресс-тиски из домкрата

To hydraulic Jack worked in the horizontal plane, it is necessary to set the pump down, and then no alterations of the “internals” is not required.

Как сделать гидравлические пресс-тиски из домкрата

One side of the Jack is attached to the metal plate, the second relies on the area to which are attached the guides.

Как сделать гидравлические пресс-тиски из домкрата

The bushings weld the movable clamping jaw. After this will only make and fix metal plates on the jaws.

Как сделать гидравлические пресс-тиски из домкрата

Как сделать гидравлические пресс-тиски из домкрата

How to make a hydraulic press vise from the Jack you can see in the video below. This idea belongs to the author of the YouTube channel “STRIKE while the iron“.

Source:

sdelairukami.ru

Show More

Related Articles

Leave a Reply

Your email address will not be published. Required fields are marked *

Back to top button
Close

Please disable your ad blocker

We know you are here for the stories. Not the ads. But we need the ads to keep the lights on. So please whitelist Buzzon.live.
Cookie Box Settings