Removable mosquito nets, fitted with a pair of small plastic handles. For a few seasons, the plastic from which they are made, loses its properties. As a result, when you try to remove the mesh handles just break off. Thus, change them to the same new is not an option. More reliable, handles can be done in a couple of minutes from regular PET bottles.
What you’ll need:
- flat head screwdriver;
- PET bottle.
The repair process handles mosquito nets
First you need to remove the old broken handle. To do this, you must pry off the rubber seal on the frame of the grid around them, and pull it to the width of 10-15 cm From under it removed the wreckage of the handles.
The new handle should be cut from the walls of PET bottles. You should use the smooth part of the bottle without relief. It is desirable that the plastic was thicker, so it’s an ideal bottle to the 5 litre or more. From it cut 2 identical pens in the shape of a tongue.
Further the new pen is laid under the rubber gasket and stalkivaetsya in place.
As a result, the tabs to buckle, and locks on the frame.
The handle is made of PET not afraid of sunlight, due to which will last much longer purchased. They are practically invisible, so this alternative is the most successful.