Finished Venetian plaster in buckets is expensive, so it is not available for the budget repair. If this method of finishing is very like, but do not want to overpay, decorative plaster can be done by hand from more affordable materials. The beauty of a homemade plaster in low cost and weather resistance. It can be used both indoors and outdoors. It is also suitable for the decoration of the shower.
- finish cement plaster (white);
- PVA glue construction;
- color for paint;
- wax for Venetian plaster, lacquer or mother-of-pearl enamel.
The process of making and applying a homemade Venetian plaster
To prepare the plaster, you need to dilute in water in proportion 1:10 PVA glue.
The resulting composition is used instead of plain water when mixing with cement putty finish. Due to the presence of glue that acquires the necessary plasticity. Need to cook small amount of Venetian plaster, as it sets up fast and you just don’t have time to develop it on the walls.
Next the finished mixture is divided into portions and colored with ordinary color schemes for paint.
In this case, preparing 3 colors: dark green, light green and black.
For the application of the composition to the wall to throw in the trowel with a spatula for a little plaster of each color. Then they shuffled a few times directly on Kelme to get a divorce. After that, apply the plaster on the wall by undulating vibration. The spatula does not need to much to leave a thin layer.
Covering a small area of the wall it is necessary to remove the nodules, while the material is wet. Then you need to make zheleznenie a Venetian trowel.
The plaster is smoothed first with a light pressure and, after drying, with a stronger pressure. After that metallic Shine and it will increase the clarity of the picture.
To protect made of plaster and of the best displays of color, you should do the treatment of the walls with wax, varnish or just to cover the mother-of-pearl enamel for interior and exterior use. The finish composition is applied with a spatula and very thinly distributed over the surface.
It will make the plaster water-resistant. Can be used dissolved in turpentine beeswax. This option high quality, cheap, but requires you to ventilate the room more than a week until the smell disappear.
Gloss Venetian plaster depends on the applied protective coatings and number of layers. When working with a homemade need to adhere to the same rules as the original plaster. It should not be applied over too large area to the nodules is not froze up zhelezneniya.
Watch the video