To bolts, screws, nuts and other little stuff was not randomly scattered throughout the Studio, just to make them a practical storage system.
In this review we will consider how to make a wall organizer for tripe. For this we will need scraps of metal, remnants of the lumber (boards) and glass jars with lids.
I also want to share with you a simple way how to clean iron from scale. Quickly and efficiently.
Start to work
First from the strip of metal cut off 10 pieces of the same length. Then weld the two sides of the organizer in the form of a five-pointed star.
Drill in the bands of holes, then weld nuts (see photo below).
Next, cut off a piece of round tube and welded to it two sides. A pipe press-fitted in two bearings (on the edges) and insert the threaded pin.
In the next step we prepare the next batch of pieces of metal. Of them will need to cook the base (frame) design.
Combine the metal pipe with the side frame (a rotating drum installed in the upper part of the structure).
Then saw off a piece of Board or plywood. Fasten them by two covers.
Fasten pieces of wood to the side. Then fasten the organizer to the wall (above the Desk or somewhere in other place). Banks screw with the little stuff to cover.
Details on how to make this organizer look at the video below. The idea from the author’s YouTube channel Kwando Technic.