If the plot of ground growing grass and weeds where they are not needed, you can use one tool, destroying all vegetation, without exception. After processing plants dry out, and remains a bare soil on which for a long time then nothing grows.
The procurement process for tools and tillage
As a means for controlling undesirable vegetation on the site is used the furnace condensate collected from the chimney. In the presence of a solid-fuel boiler during the winter it accumulates much.
Substitute capacity for its collection, and the accumulation of condensate to pour in cans. For the treatment of weeds even in a small area needs tens of liters of condensate, so it is desirable to collect all.
Inside the condensate are present in chemical compounds, in particular sulfur. As a result of their availability, it has a characteristic red or black. The liquid in closed containers stored for a long time, so it is no problem to accumulate all winter and then use it with a advent of heat.
For processing site is required to literally fill the soil collected condensate. Already in 3-4 days there is available the vegetation withers and turns yellow and turns into hay. In the future, no weed seeds germinate longer there. Remains bare dark soil. Will never get used to this place and cultivated vegetation, so the tool is not suitable for processing site before it is ennobling flowers or lawn grass.
Treatment furnace condensate clogs the soil is incompatible with the growth of the plants chemical compounds. So it can be used only in those places where soon not planned what to grow. It is impossible to pour out the condensate near the well or a vegetable garden. First and foremost, the tool can be used to shed land for construction for the cleaning of scrubs. It is also possible to treat the blind area around the house, if there divorced tenacious weeds.
Furnace condensate can be used in winter, which is convenient if there is no capacity for storage in large quantity. Accumulation in the canister can be poured onto a previously scheduled pad directly on the frozen ground, previously throwing snow. Pouring at a high layer of snow is not necessary, as if it has a crust of ice, the condensate does not fully reach the ground, and then the melting will spread out wider than the planned area. After each Strait the treated area is marked, and further with the emergence of the collected condensate processing is performed from left label.