In today’s article will explain how using available materials to make inexpensive cushion for the creation of decorative plaster on the wall surface.
With this roller you can easily make an imitation of brickwork on plastered wall surface.
Of the basic materials we need:
- handle with rollers from an old paint roller;
- a piece of plastic pipe;
- electric cable (old);
See also how to make the original round table at the cottage of cement and old tires.
First cut a piece of plastic pipe along the length of the upper arm. The inner diameter of the pipe corresponds to the diameter of the rollers, which is mounted on the arm cushion.
Next, cut pieces of electric cable of suitable length. Of the four segments do ring, glue the ends together.
The diameter of the rings corresponds to the outside diameter of the pipe. Three pieces of cable need to leave straight.
Put the rings on plastic pipe, fix them with superglue. Then glue three direct piece of cable, arranging them in a staggered manner (that is, two outer pieces must be on one line).
Decorative cushion ready. To work they are very comfortable, and it should be noted that the artistic imitation of brick masonry becomes quite qualitative.
Details on how to make a cushion for decorative plaster walls, see in the video below. This review is based on the YouTube video channel natan pinturas e efeitos.