For replanting you can make cement pots in the form of bags. They look very fresh and unusual. Cement pots can be do any size from very small to large, intended for planting ornamental trees.
The process of making pots
First you need to choose a shape approximately equal to the desired volume pot. It may be tin, plastic bucket of paint and even factory flower pot.
On selected capacity from the bottom at the bottom need to wrap any fabric to get the extension. The edges can be fixed with tape or leave the fabric threads.
Then on the form put a plastic bag.
In a separate large enough capacity to mix the cement with water. Need to get a liquid consistency, is able to permeate the fabric, but not quite fluid as pure water.
In a cement tub, soaked a piece of cloth. It may be an old bed sheet, t-shirt or something like that. It is sufficient to prepare 3 flap. One of them must be of a size to cover the form completely. The rest are smaller. Rags soaked in cement mortar and laid on a form turned upside down. The wound on her fabric must be placed in the center.
First, overlap the 2 smaller flap, then great. They should be well smooth to get the air out and get a neat uniform folds from all sides.
Then at the bottom you need to tie the form with tape or rope to get thinning. Hanging flap, if necessary, trims, and folds completely aligned.
Form inverted and located above the strip of the fabric curving down. The field blank must dry for 24 hours.
On the second day is preparing once again cement grout. From the preform is removed form with a roll extending tissue. Then it is coated with cement using a paint brush. The solution is applied inside and out. You just need to hide parts with the protruding tissue.
Allowing the pot to dry at least overnight, it must be sanded to remove rough burrs. After that he painted.
Optimum use of spray paint, then it will be perfect without a trace of the bristles of the brush. Already for a couple of hours the paint will dry enough that the pot can be used for other purposes.