In this review, the author will show you how to make folding barbecue grills. In the country, this grill will be the best time, since its storage will not be required much space.
First, cut four blanks from a shaped tube. In two long blanks drill hole (center). Put them together with a piece of round steel bar.
You may also be interested to read how to make a vertical grill from a round pipe.
Manufacturer of folding legs
Put all four blanks in a single “stack”, and then they drill one hole. Two lower and two upper workpiece being joined in pairs by means of a round rod.
After the manufacture of the second component. Connect two legs of the grill with a piece of metal pipe.
On the opposite side need to be welded two square rods as shown in the photo below.
In the next step we cut out two pieces of metal and weld them to the previously made construction. You will also need to weld the end and side walls.
From the corner the author makes the handle and welded them to the end walls of the grill, easy to carry in the assembled state.
In the photo below you can see a makeshift barbecue grills in the folded state. In this way it is much easier to store in the garage or in the shed.
Details on how to make folding barbecue grills, you can see in the video below. The review was prepared based on the author’s YouTube video channel ideas corner.