Summer is the season of berries and fruits, but the entire crop can be lost because of the pesky birds, then I’ll tell you how to make a homemade product to get rid of flying pests. Also its vibration along the rod, great scares and moles in the ground where installed.
We will need:
- A plastic bottle with a volume of 1.5 or 2 liters.
- A piece of tin.
- Long screw or nail.
- A short screw.
Manufacturer of turntables:
Take a bottle and cut off her bottom. Marker divide the bottom into 10 parts, and cut out five of them, passing through one. You should get a propeller.
Let us “noise” part of the fan. Cut tin three square plates with sides long and 1 cm. They drill holes of such diameter that the plates were freely put on a small screw.
To fully assemble the rotating part of the tube with an awl and pierce a hole.
Collect. On the screw put on the plate, the propeller, the two remaining plates and all is screwed into the tube, but not tight, to be able to rotate freely.
Start the manufacture of the housing the vane, and for this we need the remaining part of the bottle. Done in her two holes opposite each other. The holes should be of such diameter that the bottle can rotate freely on a large screw.
Join all the pieces together. Wrap the tube with a propeller on the bottle, large screw with a bottle screwed into the stick. Set the stick in the garden and waiting for the wind.
Such a chopper can be done very quickly and of the available materials, and the birds no longer attack and destroy the harvest of berries, fruits and vegetables.