This review will show you how easy it is to make a square tile of concrete for garden paths.
The first thing you need to prepare the base, where there will be tile. Remove the top layer of soil, sealing the ground hand tamper and cover with fine gravel.
Then collect the formwork boards square shape. Board fastened with screws, so it was convenient to disassemble the mold.
I want to share with you two simple ways to make a trail of concrete in the country.
Start to work
Stacked wooden formwork on the prepared base. Cut pieces of wire mesh (for reinforcement) and put inside the formwork.
When pouring concrete, the mesh will need to be raised slightly so that it was approximately in the middle of the tile.
Next, knead the cement and pour it into the formwork. Vibrate the solution to uniformly fill the space inside the casing. Then smoothed with a trowel.
When the concrete solidifies and is firm enough, dismantle the formwork. If there are sinks on the sides of the tiles, gloss over them with a solution.
See also: how to make a wavy concrete curb with their hands.
Details on how to make a tile out of concrete, you can see in the video below. Idea shared by YouTube channel Big Island Pulse.