If you need to cut it into pieces with long boards and sticks (or metal) with a length of 4-6 m, then for convenience, you can use a homemade stand with castors.
The first thing you need to make videos themselves. To do this, the author uses two section of a thick-walled tube with a length of 15 cm is press-fitted in them bearings.
The bearing insert segments of threaded rod and fix nuts on both sides. The rollers are ready.
You may also be interested to read how to make a hydraulic press-vices on the basis of the Jack.
The main stage of the work
In the next step of the strip of metal manufacture U-shaped frame. To do this, make shallow cuts with a angle grinder then bend the workpiece, and place the bend ovarium.
Welded to the frame support rollers. Bottom weld a section of round pipe. Drill a hole, weld the nut and screw the bolt.
Then cut a piece of pipe and a piece of stud. Cranking on the stud for two nuts that are inserted into the pipe and ovarium.
The pipe weld legs (they can be made from a shaped tube). Screwed into the tube pin.
On the free end of the screw-on studs, two nuts, and then combine the parts of the structure together.
After painting will only be screwed to the legs castors with brake. The rack itself is easy to adjust for height, so that the work piece is clearly on the level.
Read more about how to make a stand with castors, you can watch the video on our website. The idea of homemade belongs to the author’s YouTube channel Fawa Bros.