In this review we will consider how to make a useful tool that will be useful to those involved in repairing the house. We will talk about making a reverse hammer for laying laminate.
First, the author cuts two pieces of steel channel, and cuts off from them all superfluous. The width of the first piece is 4 mm, the second is 6 mm.
Then you need to prepare a steel rod and a cylindrical disc, which will serve as a hammer.
In the disc center you need to drill a longitudinal hole in which is inserted a round rod. Backlash should be minimal.
If you plan to paint the walls, then you may appreciate another homemade tool — hopper bucket for applying cement mortar.
Start to work
In one of the pieces of steel channel (width 4 mm) you will need to drill a hole under the diameter of the steel rod.
Then cut off a small piece of metal plate, and also drill a hole under the diameter of the rod.
Prepare parts for welding (clean, cut the excess with a grinder) and then weld.
Additionally, you will need to weld two nuts: to the metal plate and the piece of channel. We clean the welds with a grinder.
In the last step will only need to degrease and paint the assembled tool. Then you can start to work.
Details on how to make a hammer for the laying of laminate, look at the video below. Idea shared by YouTube channel Valera Nebo.