In this review, the author decided to make the country electronova the tree (cutting branches). The basis of homemade serve a small angle GRINDERS (Bulgarian).
Start to work. Cut three pieces of metal and weld them together to get detail P-shaped.
The top of the expanded items, welded another small piece of metal. We clean the welds with a grinder.
We also advise you to read how to make a universal nozzle with eccentric grinders. This art project allows you to use LBM as an orbital sander.
In the next stage of the drill in the previously manufactured part of the hole. In one of the holes of the inserted portion of the bolt with the hat, and ovarium.
Then cut from the steel bar and two hollow balls (with hole drilled) produce one more detail.
Proceed to the Assembly
The first item installed on the grinder. Fix its clamp nut from LBM. On the bolt, put on the second part (the connecting rod). Put on top of the washer, and then obvalue.
The gearbox housing of the LBM fasten two metal plates, pre-drilled holes in them.
Then produce a third detail of the structure (see photo below). Fasten it to the rod. Between the plates and weld a piece of shaped tube with a hole.
In the end will only have to weld mounts to the saw blade on wood. And set the canvas itself.
Read more about how to make the country electronova the tree, you can see in the video below. This review is based on the YouTube video channel Chế Tạo Hay 5 phút.