The size of standard nozzles for pressure washers do not allow you to get to hard to reach places. To wash the vehicle’s underbody, engine compartment or radiator, you can quickly make a short nozzle.
- ball valve, 1/4 inch;
- the barrel 1/4 inch;
- adapter 1/4 inch on the existing copper pipe;
- flared copper tube nut.
The process of manufacturing the nozzle
To make the nozzle, you need to wind on the crane using fumanti one side of the barrel, and on the other the adapter. The adapter is screwed a short flared copper tube. Its free end clamped.
The nozzle is mounted on the sink. For deployment, you must open the faucet. If the spray pattern is weak, it is possible to pinch the end of the tube is denser or Vice versa it expand.
To get adjustable short nozzle, it is possible to improve the existing design.
In particular, instead of the baffle to set on up one flare nut and flared the edge. We then screwed the barrel and nozzle. In this performance you can change the tightness of the nozzles and thereby adjust the spray pattern.