In this review, the author will share, though not the simplest, but quite a good way to connect a ragged steel cable.
In principle, we cannot say that this method is just megacolony, and a few can practice. No, it is not so.
This task copes, each master, and in General — any man who knows how to hold the instrument.
The first thing you will need to cut a piece of stud of suitable length. It is necessary to drill through the longitudinal hole (slightly larger than the diameter of the cable).
See also: how do you make a lead lug for steel cable.
In the next phase, we clamp the pin in the vise, take a grinder and cut the pin to the middle to make a hole.
With the ends of the studs are inserted the two ends of the rope and threaded them through the window in the Central part.
Then cranking on the stud for two nuts, and tighten them to press the ends of the cable. Of course, you need not tighten by hand and with wrenches.
Read also the article: tips and tricks when renovating a house.
Details on how to connect the raw cable, you can see in the video below. This idea belongs to the author of the YouTube channel Be Creative.