For cooking on the street in Kazan it is possible to make a portable stove out of old wheel rims. It’s a lot easier than doing the brickwork, and in addition, a stove can be hidden on the uselessness or to take along on a picnic.
- forged wheels – 2 PCs.;
- door hinges -2 PCs.;
- heat-resistant paint;
- stud M8;
- pipe any.
The manufacturing process of the stove
The disks are stripped off from dirt and rust flake. One of them is cut a hole for the installation of existing cauldron.
Then they are welded together so that front side with holes was out.
Side welded discs cut up door for loading wood. You must first penetrate their height and to install door hinges.
You must then make a wedge cut on the seam between the outer sides, because the ledge will prevent the door from opening. After that, the door is already cut out completely.
As a handle it is possible to weld on the door pin and screw on it a wooden disc.
From the bottom to the stove welded to the legs. For presentability we could paint it with heat resistant spray paint.