In this review, the author will show you how to make a practical high chair 2 in 1. That is, it can be used as chair and also as a box for carrying tools.
Why do you need it? Well, primarily for convenience. In one person you get a seat and tool box.
For example, you need something repaired on site. Gather necessary tools and put it in a box, you come to the right place — dumped the tool box turned over and get the chair.
We suggest you to read the article: tips and tricks when renovating a house.
Material for the manufacture of the chair-box will be plywood. However, you can use the Board. You will also need the handle of a shovel.
The first thing you will need to define the future size of the chair (you can make a drawing), then dissolve the plywood into blanks of suitable length and width.
Blanks processed by grinding machine or sanding with orbital sander. Hand router remove the chamfer.
Then proceed to assembling the chair. Fasten the legs at a slight angle (for better stability). For brackets, the author uses steel angles.
Then fasten the side of the box. Put prepared pieces of plywood, drill holes in them, and then fasten the screws.
The projecting parts of the side walls should be cut. Processed this place sandpaper. To make the legs of the slot.
The last stage will only have to tie the handle, which can be made from the handle of a shovel.
Detailed assembling process of the chair-box, you can see in the video below. This idea has shared with us the author of the YouTube channel “Green Workshop“.