In this review, the author will share his own experience how to make a cool and easy to use dryer for fruit that is at hand (or underfoot).
As the basic materials, the author uses wooden bars (of which will be made the legs of the structure), as well as the MDF sheet, cut to size.
Also on a circular saw master dismissed the “ugly” Board thickness of 25 mm to bars of size 40х25 mm.
You may be interested in another cool idea: how to make country terrace of integers (not dismantled) wooden pallets.
In the next phase, the author with the help of the marker divided the sheet into squares of 10 x 10 mm, and then drilled holes drill 8 mm Hole is needed for ventilation.
Sheet hardboard is the base of the dryer. Perimeter fasten pieces of wood 25х40 mm. one bar is attached at the center.
Next on the bottom frame (which is from wooden bruskov 40х25 mm) the author collects exactly the same top frame (add only an additional 2 jumpers).
Fasten the upper wooden frame to the bottom with the help of furniture hinges.
Legs the author has made in the form of square frames, which are attached to the lower frame loop. At the center of the base is attached to the bar. For locking legs when folded, the author uses Vostochnye locks.
You will then need to tie all the accessories: the handle to lift the cover, the clips made from old hinges, and the limit switch of the door, removed from an old wardrobe.
The last stage will only fit the lower and upper frame mosquito net.
This review is based on the YouTube video channel “Easier to do it myself“.