This review will show you how to make your own hands mini circular saw from plywood and an electric drill.
Homemade is compact, so easily fits on the desktop.Suitable for sawing small pieces of wood.
For the casing handmade’ll need a piece of plywood. As a housing cover, which is both a work table, the author uses laminated plywood. Alternatively, you can use a piece of laminated chipboard.
In a home workshop may also be useful for homemade compact vise, which can be made from scraps of metal.
Start to work
The first thing you will need to collect the body. Saw off a piece of plywood the right size, then fastened them in PVA glue and screws.
Separately making the area with mounting for electric drills. To do this, use pieces of plywood and pieces of metal strips, which act as clamps.
Pad with a drill screwed inside the body of the loop. Optional adjusting screw, by which it will be possible to regulate the departure of the circular saw above the surface of the working table.
Countertop from laminated pieces of plywood fastened to the body by a hinge. Previously in the countertop will need to make two slits.
The last stage will only make the cut for circular saws. To secure the countertop, the author uses a magnetic lock.
From a piece of angle (steel or aluminum) making the rip fence. Fasten it to the countertop, pre-drilled holes in it for bolts.
Details on how to make a circular saw from electric drills, can be seen in the author’s video (author Mistry MakeTool) on our website.