Many in the country or in the garage lying around doing the old Board.
Someone may have changed the roof on the house or a wooden floor was dismantled. They can be used for the manufacture of vertical flower beds.
Select more or less flat boards, then planed and sanded them. But, in principle, you can use them raw (this is at your discretion).
If the boards have nails or screws, it is desirable to remove. First, you can get hurt. Second, they will spoil the appearance.
Great idea! How to make your own hands marching a table-transformer.
Start to work
First, saw off the size of three planks, the edges zapilivat at an angle. The author does it on a miter saw, but it is possible and manually — stuslo.
Then connect the three boards together as shown in the photo below. For greater rigidity in the upper part of the structure nailed triangular scarves. They can be made from boards or plywood.
In the vertical legs of the beds we cut the slots. Four pieces on each leg. For this you can use a Japanese saw.
In the next step we prepare a new batch of blanks — sawn off boards of different lengths.
Collect of them a triangular frame. Alternately set the frame on its feet. To the bottom frame nailed to the bottom. Rest — without a bottom.
Install the assembled structure in the right place. Fill vertical flower bed land. Raise the plants.
This review is based on the YouTube video channel DIY Woodworking Projects. If the idea you like, write in the comments under the video, my opinion.