After sharpening the blades of the clippers need to adjust before tightening screws. Otherwise the hair will srazhatsya with gaps or visibilita.
The process of adjustment of the knives
The diameter of the mounting holes of the lower blade wider than the screws that clamped it. Due to this, it can be pushed in any direction by a few millimeters. Nazivu screws it is necessary to set the lower blade relative to the upper so that in width it had the same flight left and right.
Also it needs to be pushed forward to protrude from under the upper blades 0.5-1 mm.
After adjustment for front and side crashes need to press the lower blade fingers to he had not moved and tighten it with screws. When so adjusted, the knives will cut without plucking.