In this review, the master will share with us the idea how to make a homemade device to work with sheet metal in a workshop or garage.
The author carves the metal plate of rectangular shape. Makes marking and drilling holes in it.
Next, you will need to cut a piece shaped tube. Drill holes in it, and then cut into small pieces.
Cut out two metal strips, and also drill holes in them.
Interesting idea for a workshop! How to make a universal stanochek from a small grinder.
In the next phase weld metal strip to a rectangular plate as shown in the photo below.
Two pieces of shaped tube with holes welded to one side of the metal plate.
Next, we need the bolts and bushings of suitable diameter, which can be cut from a round tube. Bolts inserted in holes, worn on their sleeve and fix with nuts.
In the remaining free holes installed bolts with bearings.
Brew the ends of the profile tubes with plugs. Cut four round rod. Put them on the bearings.
After that, start to build our design.
Round rods with bearings inserted in the holes in the plate. In them the author puts the remaining two piece shaped tube, and obvalivat.
Between the segments of the profile, weld a piece of round pipe. Homemade ready.
Details on how to make a piece of sheet metal you can see in the video below. The review was prepared based on the author’s YouTube video channel Fawa Bros.