DIY

Cunning collector cherry PET bottles in 5 minutes

Хитрый сборщик вишни из ПЭТ бутылки за 5 минту

Berries cherries on the upper branches to get extremely difficult. If the tree is young and does not have a thick trunk, then climb on it and the stairs is not always enough. To pick berries from hard to reach places, you can make a simple in the manufacture of the collector.

Materials:

  • PET bottles – 2 PCs.;
  • plastic pipe 40 mm;
  • flexible wire 3-4 mm.

The process of making the collector

Exciting cherry device collector consists of PET bottles of 5 liters with cut bottom. On the one hand, its walls are cut into 5-8 cm to the side of the neck. Then wire cut the comb to enter the peduncle. It is applied to the bottle, the edge of the wire bent and wrapped around the neck. To prevent folding of comb you can attach to the walls of the bottle with tape.

Хитрый сборщик вишни из ПЭТ бутылки за 5 минту

In the neck of the collecting device is inserted into a plastic tube, preferably a length of at least 2 m. the Second end of the tube is inserted into the neck of a bottle.

Хитрый сборщик вишни из ПЭТ бутылки за 5 минту

Хитрый сборщик вишни из ПЭТ бутылки за 5 минту

The capture of the brush cherry and the tension on the berries off the stalk and fall down into the bottle through the tube.

Хитрый сборщик вишни из ПЭТ бутылки за 5 минту

Хитрый сборщик вишни из ПЭТ бутылки за 5 минту

Thus, the collecting device need not periodically lowered for the discharge of cherry. In the tree select the branch and the berries are collected in a row, and quite quickly due to the width of the comb.

Watch the video

Source:

sdelaysam-svoimirukami.ru

Show More

Related Articles

Leave a Reply

Your email address will not be published. Required fields are marked *

Back to top button