DIY

Collect gyrometer on automotive wheels

Собираем гироскутер на автомобильных колесах

Greetings to all fans of building, propose to consider the instructions for making interesting of gyrometer with large road wheels. Looks homemade, well, this unit can drive on the sand, and maybe even in the mud, and all the attention of viewers in the city will be yours. In the manufacture of homemade is not difficult, if the project you are interested in, offer to study it in more detail!
The materials and tools used by the author:
List of materials:
– experimental gyrometer;
– wheels from vehicle;
– hub for a wheel;
– threaded rod;
a piece of round pipe
List of tools:
lathe;
– welding machine;
– drill;
– Bulgarian;
– screwdrivers, etc.
The process of making handmade:
Step one. Preparatory work
The author found wheels and hubs for them. Parse experimental gyrometer, you need to completely disassemble the motors.
Собираем гироскутер на автомобильных колесахСобираем гироскутер на автомобильных колесахСобираем гироскутер на автомобильных колесахСобираем гироскутер на автомобильных колесахСобираем гироскутер на автомобильных колесахСобираем гироскутер на автомобильных колесахСобираем гироскутер на автомобильных колесахСобираем гироскутер на автомобильных колесахСобираем гироскутер на автомобильных колесахStep two. New axis
In the wheel the author has established a new long axis. For the manufacture of such axles need the threaded rods and pipe. Cut, weld on a lathe and machined the weld. Because the hub will be attached to the wheels gyrometer, it is completely reliable.
Собираем гироскутер на автомобильных колесахСобираем гироскутер на автомобильных колесахСобираем гироскутер на автомобильных колесахСобираем гироскутер на автомобильных колесахСобираем гироскутер на автомобильных колесахСобираем гироскутер на автомобильных колесахСобираем гироскутер на автомобильных колесахСобираем гироскутер на автомобильных колесахСобираем гироскутер на автомобильных колесахStep three. Assembly
In the lid of the motor-wheels will need to drill holes for the screws. With screws fasten the new hub to the wheels of gyrometer. Well, and then finally collect gyrometer.
In conclusion, will tie the car wheels to the hubs. The author also slightly lengthened the wheel of a piece of pipe.
Собираем гироскутер на автомобильных колесахСобираем гироскутер на автомобильных колесахСобираем гироскутер на автомобильных колесахСобираем гироскутер на автомобильных колесахСобираем гироскутер на автомобильных колесахСобираем гироскутер на автомобильных колесахСобираем гироскутер на автомобильных колесахСобираем гироскутер на автомобильных колесахСобираем гироскутер на автомобильных колесахСобираем гироскутер на автомобильных колесахСобираем гироскутер на автомобильных колесахСобираем гироскутер на автомобильных колесахGoes gyrometer without problems, of course, the load on the motors increases due to large diameter wheels, and torque may slightly fall, but it looks fine.
This project is completed, hope you like homemade, and you found useful thoughts. Good luck and creative inspiration, if you decide to repeat this. Do not forget to share with us your ideas and diys!

Source:

usamodelkina.ru

Show More

Related Articles

Leave a Reply

Your email address will not be published. Required fields are marked *

Back to top button

Please disable your ad blocker

We know you are here for the stories. Not the ads. But we need the ads to keep the lights on. So please whitelist Buzzon.live.