For experts and professionals it is no secret that even a small head can greatly alleviate manual work. The main thing that it was at hand at the right time, and for her sake would not have to run to the market.
A tool with which we want to introduce you to, has several advantages. First, it homemade and make it a matter of minutes. Second, it does not need to spoil a good, suitable tool, as for some homemade. Thirdly, it is a good idea the use of unnecessary junk, which with the excess of any DIY enthusiast.
- Used drill bit for rotary hammer with a handle;
- Nut for bolt M8-12 with a wide collar.
- An angle grinder with a cutting and zachistil circles.
Step-by-step process of making nozzles for nailing
Drill bit for rotary hammer is ideal for small, standard kit with a diameter of 6-12 mm. In this case, we can apply the drill is dropped or unfit pobeditovye tips, usually throw a pity, but for working on concrete they will not fit. The nut can be both standard and specially carved for such work.
Shave this drill stalk almost to the ground, leaving the SDS adapter and 1-1. 5 cm drill. If the shaft is too big for the nut, it is necessary to whittle down.
The nut turn the collar out, and put on the drill bit so that it slightly not reached to the end, leaving a small notch 3-4 mm. Obvalue nut welding, centrue relative to a handle of the drill.
Clean the joint with shliftikom on the grinder, and our head nail finish.
Insert it into the hammer, and try to compare to hammer a long nail with a hammer or hammer head. The difference is palpable, isn’t it? And imagine how she will save time and effort in roofing, where you have a day to score the order of thousands of nails!