DIY

A full-fledged computer on Win.10 with a 9-inch monitor in 2 din instead of a radio!

A full-fledged computer on Win.10 with a 9 inch 2 din monitor instead of a radio tape recorder! ZloyBro 07-03-2019, 05:22 A full-fledged computer on Win.10 with a 9 inch 2 din monitor instead of a radio tape recorder! Hello everyone, can someone come in handy or someone wanted to do it myself!)
I will describe how I was assembling my computer into a car according to a budget option, suddenly someone would come in handy!)
Let's start with the characteristics of my computer and its capabilities:
Motherboard with process – ASUS MSI AM1I ATX and AMD 5350 processor (I took everything together 4000r .)
RAM – Kingston DDR3 1600 two strips of 4 giga each (new 2000 for two strips)
Hard disk – SSD A-DATA for 124 GB is enough for now, I took it for a new one for 1800 rubles!
Sound – ASUS Xonar DX PCI- e with optics (took it from hands for 2900r.)
Monitor – 9 “Auto Car Rear View LED Display VGA RCA AV POS Touch Screen TFT LCD Monitor AU (took on EBAY for 6000r.)
Power supply – M4- atx (I took it from my hands for 3000r. what I regretted after, the on/off button did not work)
Wi-Fi – dlink (600r.)
GPS-Glonas – Vk-172 Gmouse G-mouse Usb Gps/glonass Ublox7 Support Windows 10/8/7/vista/xp (for 800 rubles)
Case – one-sided textolite, sheet 300 * 250 5pcs, 320 rubles each < br> Amplifier -TDA7850 Car Audio Power Amplifier Board Stereo 4x 50W with BA3121 Denoiser 12V E (for 1300r.)
Radio – FM-Tuner AverMedia USB Radio 810 + antenna (for 1160, also on the way)
Rear view camera – Waterproof Night Vision Car Rear View Reverse Backup Camera with parking sensor with parking sensors (for 1324r.) As a result, water got in and I had to put the usual one into the old one for 1000 rubles and fill it with component glue!
Internet – Tele2 4G modem usb (for 1000 rubles)
Features:
Full Windows 10 Pro, radio, Internet, navigation, camera + parking sensors, video recorder, listening to losles and flak audio, video of any format, wi-fi, Hi-Fi amplifier , the ability to connect to amplify by optics!
In general, a computer without straining can simultaneously work with 5 open programs! I mean that it makes no sense to put the percent and the motherboard more powerfully (although to each his own), he also pulls games … The sound is very good, the sound card distributes sound to all 8 speakers, the temperature inside the computer according to the sensors is from 42 to 46 degrees, it works flawlessly in the heat, the amplifier that stands inside the TDA 7650 gives enough power and practically without distortion (only at the maximum)! In general, I am happy and satisfied with everyone, everyone is successful, unhurried assembly! Ask questions!)
PS I did not find any interference, interference from the engine and any other extraneous sounds, as others said!)
To make a frame, I had to buy a frame from 2din and cut off all unnecessary, also the inner bezel of the display was cut from the TV itself and soldered to the frame with a soldering iron. Then the walls were reinforced from the corners from the cover of the unnecessary system unit!
A full-fledged computer on Win.10 with a 9 inch 2 din monitor instead of a radio tape recorder!  A full-fledged Win.10 computer with a 9 inch 2 din monitor instead of a radio tape recorder! The body itself began to be made from the bottom plate on which the mother was attached (after trying on in auto where there is a place for a radio tape recorder with side walls), then the back wall (first I cut out for the back panel of the mother, and then fastened to the tin at an angle of 90 degrees.) For a long time on the Internet I was looking for information on how to make a case and from what, and so this material is ideal (it is easy to cut, plus the total weight and screen from interference).
A full-fledged computer on Win.10 with a 9 inch 2 din monitor instead of a radio tape recorder! Then we take a sheet of paper and make a stencil of the side walls in the car, cut and try to climb in or not, then fix It is advisable to solder the walls to 2 points before installing the entire body in a cavity (otherwise it will be difficult to remove them later to trim).
A full-fledged Win.10 computer with a 9-inch a 2 din monitor instead of a radio! Do not forget to make a hole in the lower part under the board, it serves for air intake and also for the sata wire on hard disk)
A full-fledged computer on Win.10 with a 9 inch 2 din monitor instead of a radio tape recorder! The SSD itself. I attached it to the bottom of the SSD case which I riveted to the main case!
A full-fledged computer on Win.10 with a 9 inch 2 din monitor instead of a radio tape recorder! Next, we make a mount for M4-ATX, modify the sound mount and put everything in place.
Full-fledged computer on Win.10 c 9 an inch monitor in 2 din instead of a radio! Conventionally, the second tier is finished, then the third tier.
A full-fledged computer on Win.10 with a 9-inch 2 din monitor instead of a radio tape recorder! A full-fledged computer on Win.10 with a 9 inch 2 din monitor instead of a radio tape recorder! The third tier took about two hours, one might say on the knee!) There will be an amplifier, FM-Tuner and heat extraction. A radiator with a fan on the amplifier on the left and a plug for the wires of speakers and other stuff on the right
A full-fledged Win.10 computer with a 9 inch a 2 din monitor instead of a radio! The draft as it should be in general!
A full-fledged computer on Win.10 with a 9 inch 2 din monitor instead of a radio tape recorder! Made a square tube to exit the air flow back …
 A full-fledged Win.10 computer with a 9 inch 2 din monitor instead of a radio tape recorder! A full-fledged computer on Win.10 with 9 inches a 2 din monitor instead of a radio! In the upper tier I put an ALPINE stabilizer just in case, also a relay to turn on the amplifier from power supply with MT- 4x, changed the capacitor to a more powerful one in the audio amplifier!
Full-fledged computer on Win.10 c 9 inch monitor in 2 din instead of a radio! Bottom line!
 A full-fledged Win.10 computer with a 9 inch 2 din monitor instead of a radio tape recorder! At the moment there is an upgrade, I want to put 10.1 inches with multitouch and of course I will succeed!) < br> Video of the computer itself!
In this video I remade the frame for the monitor, according to a new principle, the matrix 10.1 will be placed!)

Source:

usamodelkina.ru

Show More

Related Articles

Leave a Reply

Your email address will not be published. Required fields are marked *

Check Also
Close
Back to top button