DIY

A simple and quick way to make many identical crochet hooks for Christmas decorations

A simple and quick way to make many identical crochet hooks for Christmas tree decorations With a very simple attachments , you can quickly make many of the same wire hooks for hanging Christmas toys on the Christmas tree.
Greetings to all colleagues homemade , as well as all those who are interested in homemade products! < br> As the New Year approached, when I was about to decorate the tree, I suddenly had one problem. It turned out that I did not have enough hooks for hanging toys on the tree.
In general, I must say that earlier, even during my childhood, Christmas tree decorations were hung with thin ropes or thick threads. However, this method is not very convenient, since the rope has to be put on, as it were, on a Christmas tree branch and carried through its entire length. At the same time, the rope constantly touched the Christmas tree needles, so decorating the Christmas tree with toys turned into torment.
Therefore, over time, I began to use ordinary paper clips as hooks for Christmas tree decorations. It turned out that if you unbend a paper clip, then it turns out to be a rather convenient hook.
Here is an example of a crochet hook made from a paper clip.
A simple and quick way to make many identical crochet hooks for Christmas tree decorations A simple and quick way to make many identical crochet hooks for Christmas decorations Since then, I have used paper clip hooks, and I still use them. However, since Christmas tree toy hooks are often lost, their stocks have to be renewed from year to year. And since the house is not an office, paper clips are not always at hand, especially in large quantities.
That is why, even earlier, I began to use hooks for Christmas tree decorations made of thin copper wire, for example, left over from the winding of old, burnt-out transformers. This wire is quite soft, so it is very easy to make hooks from it.
However, if you make each such hook separately, it will take a very long time, and the hooks will all be different in size. Therefore, to make hooks, I began to use a very simple device that can be made in just a couple of minutes. Thanks to this device, you can very quickly make a lot of exactly the same hooks.
This time, I used such a device, and at the same time decided to share this idea with the readers. Although perhaps some of the readers already use this technology for making hooks, it may well be that someone will find it useful.
To make such a device, as well as the hooks themselves, I needed the following accessories:
Content:
• Copper wire from the transformer winding, with a diameter of 1-1.5 mm.
• Two unnecessary trimming from a wooden plank.
• A nail measuring 4×100 mm.
Tools:
• A file for wood with a sharp edge.
• Phillips screwdriver.
• Nippers or side cutters.
• Clamp.
• Hammer.
A simple and quick way to make many identical crochet hooks for Christmas tree decorations The procedure for making the device and the hooks themselves.

Step 1. Making an auxiliary device.
Step 1. Sawing the grooves in trimming the board. < br> Using a sharp edge of a file on wood, make two parallel grooves on one of the scraps of the board. The distance between the grooves can be different, but I made 4 cm. This will be the size of the future hooks.
A simple and fast way to make many similar hooks for Christmas tree decorations Step 2. Installation of the device.
Put another one on the edge of the workbench a piece of a board, and on it we put a screwdriver and a nail like this.
A simple and quick way to make many identical hooks for Christmas tree toys The nail and the screwdriver must be parallel, and located apart from each other on such the same distance as the grooves we made earlier on another cut of the board.
A simple and quick way to make many identical crochet hooks for Christmas decorations Next, put a plate with grooves on top so that the nail and screwdriver are in the grooves.
A simple and quick way to make many identical crochet hooks for Christmas tree toys And then press the upper and lower pieces of the board to the workbench with a clamp.
 A simple and quick way to make many identical crochet hooks for Christmas decorations Thus, our device for making hooks is ready!
I must say that in this case, the very working part of the screwdriver and the nail will play the role of a mandrel for winding the wire. Moreover, I specially made it so that the diameter of the screwdriver and the nail was different. The diameter of my screwdriver is 6 mm, and the diameter of the nail is 4 mm.
A simple and quick way to make many identical crochet hooks for Christmas tree decorations This is necessary so that the size of the sides of the hooks is different. So the small side of the hook will be attached to the Christmas tree decoration, and the large side will be hung on the branch of the Christmas tree.
Step 2. Making the hooks themselves.
Step 1. Winding the wire.
Take the wire length 3-4 m, and we begin to wind it on a screwdriver and a nail as if crosswise, that is, in the form of an eight.
A simple and quick way to make many identical crochet hooks for Christmas tree toys A simple and quick way to make many identical crochet hooks for Christmas tree toys After we have wound a dozen turns, we need to seal them, that is, better press them to the base of our device, for example, with a hammer, lightly hitting them on the wire turns.
A simple and quick way to make many identical crochet hooks for Christmas tree decorations Then we wind the wire further until the coiled turns reach the ends of the nail and screwdriver.
A simple and quick way to make many identical crochet hooks for Christmas tree decorations A simple and quick way to make many identical crochet hooks for Christmas tree toys A simple and quick way to make many identical crochet hooks for Christmas tree toys A simple and fast way make a lot of identical crochet hooks for Christmas tree toys Now we remove our winding. It looks like a flat spring.
A simple and quick way to make many similar crochet hooks for Christmas tree toys A simple and quick way to make many identical crochet hooks for Christmas tree decorations This kind of spring needs to be slightly stretched so that the coils can be bitten off with wire cutters.
A simple and quick way to make many identical crochet hooks for Christmas decorations Step 2. Biting off the hooks.
Well, now, with the help of the wire cutters, we bite off the individual loops that represent the hooks. To bite off, or rather – to bite the loops, you need to in the middle, after one loop.
As a result, we get such, almost ready-made hooks.
A simple and fast way to make many identical crochet hooks for Christmas tree decorations In total, from this winding, I got about ten such hooks.
 A simple and quick way to make many identical crochet hooks for Christmas decorations Step 3. Finalizing the hooks.
I must say that in principle, hooks can be used in this form. However, such hooks are not very convenient, so I will additionally modify them to a more convenient look, biting off a small piece of wire from each hook at both ends.
A simple and quick way to make many identical crochet hooks for Christmas tree decorations A simple and fast way make many identical crochet hooks for Christmas tree toys Simple and fast a way to make many identical crochet hooks for Christmas tree decorations The Christmas tree toy is suspended from the smaller tip of such a hook, and the hook itself is additionally bent for greater reliability, that is, so that the toy does not jump off the hook.
 A simple and quick way to make many identical crochet hooks for Christmas decorations The upper, larger end, the hook is suspended from a Christmas tree branch.
< img class = "aligncenter" alt = "A simple and quick way to make many identical hooks for Christmas tree decorations" src = "https://usamodelkina.ru/uploads/posts/2021-01/1609653994_izobrazhenie-024.jpg"/> By the way, when we hang the hook with a toy on a spruce branch, the upper part of the hook can also be tightened so that the hook is guaranteed not to fall off the branch.
 A simple and quick way to make many identical crochet hooks for Christmas decorations A simple and quick way to make many identical crochet hooks for Christmas tree decorations A simple and fast way make many identical crochet hooks for Christmas tree toys Just due to the fact that the copper wire is quite soft, the ends of such hooks are very convenient to tighten, which makes them very reliable and practically eliminates the falling of expensive and fragile toys from the Christmas tree.
However, you should not think that due to softness copper wire, such hooks can unbend spontaneously. In fact, they can withstand quite a lot of weight.
For example, I hung a rather heavy adjustable wrench on such a hook.
A simple and fast way to make many identical crochet hooks for Christmas tree decorations And my hook perfectly supports its weight, although if we compare this weight with the weight of a Christmas tree toy, then such an adjustable wrench probably weighs 10-15 times more than an average Christmas tree toy.
In addition to the speed of production and reliability, such hooks have many other advantages. So they are very durable, because they do not corrode and do not rust at all, unlike the same hooks made from paper clips. Besides, they are neutral in color and not very noticeable against the background of the Christmas tree. Although, if desired, such hooks can be easily painted in any color using a spray can of paint of the desired color.
In general, we can say that such hooks are quite convenient and practical.
Well, I finish here and wish all homemade health and good luck in the new year!

Source:

usamodelkina.ru

Show More

Related Articles

Leave a Reply

Your email address will not be published. Required fields are marked *

Back to top button