DIY

Snow is also grass (ice brush in 5 minutes)

Snow is also grass (nozzle for cleaning ice in 5 minutes) For the sake of experiment I made just such a thing. At first I welded on the blades, but the steel turned out to be rather weak and broke off, although it was adaptable and worked well.
Well, then I just made cuts in the disk and bent it. The steel is spring-loaded, it softens shocks well. To center the disc (the hole is bigger there), we use a piece of aluminum wire, you can roll it into a ring.
Best cleans packaged snow, pushes to the ground or to a thick layer of ice. Thick ice is difficult to take, although after processing it becomes rough and not slippery.
You can well clean different areas, paths, and so on. The loose snow cleans poorly, but research continues …
Snow is also grass (nozzle for cleaning ice in 5 minutes) < a href = "https://usamodelkina.ru/uploads/posts/2021-01/1610818382_gopr4522.jpg" rel = "prettyPhoto">Snow is also grass (nozzle for cleaning ice in 5 minutes) Snow is also grass (nozzle for cleaning ice in 5 minutes) Snow is also grass (nozzle for cleaning ice in 5 minutes) Snow is also grass (nozzle for cleaning ice in 5 minutes) Snow is also grass (nozzle for cleaning ice in 5 minutes)  Snow is also grass (nozzle for cleaning ice in 5 minutes) < img class = "aligncenter" alt = "Snow is also grass (nozzle for cleaning ice in 5 minutes)" src = "https://usamodelkina.ru/uploads/posts/2021-01/1610818416_gopr4531.jpg"/> Don't forget that such homemade products can be dangerous ! Use protective shields for the brushcutter (I was too lazy to look for mine) and work it if there are people or animals nearby.
However, the curved blades are unlikely to break, the steel is strong there.

Source:

usamodelkina.ru

Show More

Related Articles

Leave a Reply

Your email address will not be published. Required fields are marked *

Back to top button