DIY

Polyester resin ring with glow effect

Polyester resin ring with glow effect  Polyester resin ring with glow effect Polyester resin ring with glow effect < a href = "https://usamodelkina.ru/uploads/posts/2021-01/1611049508_1-4.jpg" rel = "prettyPhoto"> Polyester resin ring with glow effect Polyester resin ring with glow effect В In this article, a home-made master will introduce us to his work, namely, polyester resin rings. A distinctive feature of his work is the natural glow of the rings in the dark. Moreover, for the glow, neither energy sources nor LEDs are needed.
Tools and materials: -Polyester resin; -Luminophor powder;
-Plastic containers;
-Paint tape;
-Smeal paper;
-Engraver with various attachments;
-Polishing paste;
-Superglue;
-Drilling machine;
-Lathe;
-PVC-pipe;
-Billets from epoxy;
-Crowns with diamond dusting; -Caliper;
-Templates;
Polyester resin ring with glow effect Polyester resin ring with glow effect  Polyester resin ring with glow effect Polyester resin ring with glow effect Step one: first filling
The ring consists of two layers, the inner one – with a phosphor , and external – with a pattern. First, the master will make a blank for the inner layer.
He will use a PVC pipe with a glued bottom as a mold.
Mixes the correct amount of resin with phosphor powder. Fills the mold with resin. In a day, he removes the workpiece.
Polyester resin ring with glow effect Polyester resin ring with glow effect < a href = "https://usamodelkina.ru/uploads/posts/2021-01/1611049494_1-11.jpg" rel = "prettyPhoto"> Polyester resin ring with glow effect Polyester resin ring with glow effect Step second: the diameter of the ring
To determine the diameter of the ring, the master uses special plastic templates. In this case, he chooses the size 10 us. Chooses a crown for this size. The crown should be slightly smaller in diameter, it should be borne in mind that with further processing the diameter will become larger. The master uses the crowns that are used to drill holes in the tiles, with diamond plating.
Having drilled the workpiece, he begins to grind the inside with 180 grit sandpaper, gradually increasing the grain to 400.
After machining the inner diameter, he sets the workpiece into a lathe and grinds the outer wall to a total thickness of 2 mm. The master advises against making the wall thinner than 2 mm, the thinner the wall, the worse the glow will be.
Polyester resin ring with glow effect < a href = "https://usamodelkina.ru/uploads/posts/2021-01/1611049501_1-15.jpg" rel = "prettyPhoto"> Polyester resin ring with glow effect Polyester resin ring with glow effect < a href = "https://usamodelkina.ru/uploads/posts/2021-01/1611049573_1-17.jpg" rel = "prettyPhoto"> Polyester resin ring with glow effect Polyester resin ring with glow effect < a href = "https://usamodelkina.ru/uploads/posts/2021-01/1611049572_1-19.jpg" rel = "prettyPhoto"> Polyester resin ring with glow effect Polyester resin ring with glow effect < a href = "https://usamodelkina.ru/uploads/posts/2021-01/1611049516_1-21.jpg" rel = "prettyPhoto"> Polyester resin ring with glow effect Polyester resin ring with glow effect Step third: outer layer
For the outer layer, it uses the presets left over from previous projects.
First, I measured the outer diameter of the phosphor blank. Then I cut a hole with a crown. The hole diameter is also slightly smaller than the inner layer diameter. It grinds the hole diameter to fit the inner ring.
Polyester resin ring with glow effect  Polyester resin ring with glow effect Polyester resin ring with glow effect  Polyester resin ring with glow effect Polyester resin ring with glow effect  Polyester resin ring with glow effect Before pressing, pastes over the inner part of the luminescent ring with masking tape. Applies glue to the outside. Pressing the ring in.
Ring made of polyester resin with glow effect Polyester resin ring with glow effect < a href = "https://usamodelkina.ru/uploads/posts/2021-01/1611049590_1-30.jpg" rel = "prettyPhoto"> Polyester resin ring with glow effect Step four: giving the desired shape
After the glue has set, it grinds the ends on a grinding machine. Then he sets the ring on the lathe and grinds it so that the outer layer is thin enough so that the ring shines through the outer layer.
Then it works in width and shapes.
 Polyester resin ring with glow effect Polyester resin ring with glow effect < a href = "https://usamodelkina.ru/uploads/posts/2021-01/1611049523_1-33.jpg" rel = "prettyPhoto"> Polyester resin ring with glow effect Step five: grinding and polishing
After shaping, it starts the sanding process. Sandpaper 180 to 400 grit.
Just before final sanding, he applies a couple of coats of super glue. This is necessary in order to close possible small gaps between the joints and to protect the surface.
Last sanding, wet by hand with 400 grit sandpaper.
Polyester resin ring with glow effect < a href = "https://usamodelkina.ru/uploads/posts/2021-01/1611049597_1-35.jpg" rel = "prettyPhoto"> Polyester resin ring with glow effect Polyester resin ring with glow effect < a href = "https://usamodelkina.ru/uploads/posts/2021-01/1611049579_1-37.jpg" rel = "prettyPhoto"> Polyester resin ring with glow effect Polyester resin ring with glow effect Last step is polishing. For polishing, he uses a woolen polishing wheel, an engraver and a polishing paste.
< img class = "aligncenter" alt = "Polyester resin ring with glow effect" src = "https://usamodelkina.ru/uploads/posts/2021-01/1611049572_1-39.jpg"/> Polyester resin ring with glow effect  Polyester resin ring with glow effect Polyester resin ring with glow effect Everything is ready.
 Polyester resin ring with glow effect Polyester resin ring with glow effect  Polyester resin ring with glow effect Polyester resin ring with glow effect Below you can see other works of the wizard.
 Polyester resin ring with glow effect Polyester resin ring with glow effect  Polyester resin ring with glow effect Polyester resin ring with glow effect  Polyester resin ring with glow effect Polyester resin ring with glow effect Polyester resin ring with glow effect

Source:

usamodelkina.ru

Show More

Related Articles

Leave a Reply

Your email address will not be published. Required fields are marked *

Back to top button