DIY

How to make the simplest marking gauge

Hello dear readers and DIY creators !
It is often necessary to quickly and accurately mark the center line on the edges of wooden blanks.
In this article, Glen, author of the YouTube channel DIY Creators “Will tell you how easily and quickly you can make a special tool for solving these problems, namely, a marking gage.
 How to make the simplest marking gage

How to make the simplest marking gauge With all its simplicity manufacturing, it is – a very functional device .
Materials necessary for home-made.
– Wooden block
– Wood screws, dowels
– Joiner's glue.
Tools used by the author.
– Screwdriver, Forstner drills
– Conductor for dowel holes, drills with stop
– Universal marking planer
– F-clamps, plastic spring clips
– Metal spring clips
– Adjustable square, metal ruler, pencil.
Manufacturing process.
This requires a small piece of wood. Its length should be at least twice as large as the estimated thickness of the marked parts.
In this case, the master took a block about 25 cm long and marked the center on it.
How to make the simplest marking gauge Then two additional points are marked on the block, at a distance of 1.5 inches from the center along the centerline. The dowels will be attached at the two ends.
How to make the simplest marking gage How to make a simple marking gauge According to the markings, a pair of blind holes are drilled at these two points with a Forstner drill 12 mm in diameter.
For the convenience of drilling, the workpiece is fixed in a clamp or vise.
How to make the simplest marking gage How to make the simplest marking gauge These holes should be drilled strictly perpendicular to the workpiece surface. This is usually done using a drilling machine, or such a jig.
If this is not the case, then you can use a very simple technique. Take a piece of wood, draw a straight line (perpendicular to the edge) on it with a square, and use the marked line as a guide for the drill. Keep the block as aligned as possible along a horizontal line on the workpiece. In this way, the author drills a pilot hole in the center of the workpiece for a self-tapping screw.
How to make the simplest marking gauge How to make the simplest marking gage How to make the simplest marking gauge How to make the simplest marking gauge Two 12- mm dowels are coated with wood glue and inserted into the prepared holes.
< img class = "aligncenter" alt = "How to make the simplest marking gauge" src = "https://usamodelkina.ru/uploads/posts/2021-01/1611269446_sov-036.jpg"/> How to make the simplest marking gauge In this case, the angle at which the dowel enters the material must be checked with a square. The angle must be 90 degrees.
How to make the simplest marking gauge How to make a simple marking gauge Most homemade marking planes use regular graphite pencils for marking. In our case, a self-tapping point will be used instead. The author has his own reasons for this. First, this design is more durable. Secondly, by tightening the screw, you can adjust the depth of the planer and the depth of the mark itself.
 How to make the simplest marking gauge How to make the simplest marking gauge The thickness gauge is applied to the workpiece, and unfolds until both dowels rest against the edges of the part. The tip of the self-tapping screw will automatically be exactly in the middle of the edge.
How to make the simplest marking gage How to make a simple marking gauge How to make a simple marking gauge You can use a marked line point with a pencil for contrast.
How to make the simplest marking gauge How to make the simplest marking gauge If you wish, you can increase the overhang of the tip, but the deeper the line is supposed to be made, the more effort will be required. to stretch the planer cutter over the workpiece.
How to make a simple marking gage How to make the simplest marking gauge How to make the simplest marking gauge How to make the simplest marking gauge This type of tool can also be used for marking metal blanks, for example, shaped pipes, strips, etc. e. To increase wear resistance, dowels can be replaced with brass or steel bars.
I thank the author for the simple way of making a marking planer.
Good mood, good health, and interesting ideas to everyone!
Subscribe to telegram-channel site, so as not to miss new articles.