DIY

Motorized bike trailer

Motorized bike trailer Oh, these travelers are tourists on bicycles. Spin the pedals, over a dozen kg. equipment and a route for more than a dozen kilometers. And a lot is needed, because basically the path is laid not along highways, but along protected areas. Many began to use bicycle trailers trailers , you can take more luggage, but again, you have to pedal. What kind of rest it is, this is slave labor.
I propose to consider an option that will relieve discomfort during travel. Many have heard and read about motorized dogs. If anyone else is not in the know, this is a small tug that pulls or pushes a sled, or a cart together with a rider.
Motorized bike trailer So, imagine that you are being pushed forward by a fully stocked trailer while sitting on a bicycle. It is not you who are him, but he is you.
It can contain a motor, internal combustion engine or electric. The trailer itself can be on two wheels or on one.
 Motorized bike trailer Motorized bike trailer  Motorized bike trailer Motorized bike trailer Bicycle without alterations turns into a moped, with all this the owner always has the opportunity to shake his legs.
The author told in detail how he made a two-wheeled miracle from a gyro scooter and we will now get to know this.
A profile pipe was taken for the frame, five parts were cut out of it and welded together. Welding seams cleaned.
Motorized bike trailer Motorized bike trailer Then he made a suspension pendulum. Two pipes are taken, one can be put on top of the other with a slight backlash. The inner tube is intact, while the upper one consists of three rings. The outer rings are welded to the edges of the inner pipe, and a piece of shaped pipe is welded to the movable middle ring.
 Motorized bike trailer Motorized bike trailer Motorized bike trailer Motorized bike trailer Motorized bike trailer Having well welded to the frame, fixed supports for shock absorbers are welded to the frame immediately from the back.
Motorized bike trailer Motorized bike trailer Next, mount on bicycle shock absorbers and assembled are fixed on pendulums and supports
Motorized bike trailer Motorized bike trailer  Motorized bike trailer Pads for fastening the axles of the wheels are made from the corner and are also fixed on the pendulums by welding. By stepping on the assembly, you can check how rigid the system is.
Motorized bike trailer Motorized bike trailer Motorized bike trailer Wheels are made like this, the wheels of the gyro scooter are removed, disassembled. The tire is removed, holes are marked and drilled along the radius of the tide of the body and cover. Rims, spokes are taken and all this is twisted into motor wheels. Then the wheels are installed on the platforms of the pendulums.
Motorized bike trailer Motorized bike trailer Motorized bike trailer Motorized bike trailer Motorized bike trailer Motorized bike trailer Motorized bike trailer  Motorized bike trailer Motorized bike trailer  Motorized bike trailer Motorized bike trailer  Motorized bike trailer The result is a cart that needs to be attached to the bike. The hitch should work for turning, turning and swinging. For this, it was possible to use a small crosspiece, well, in extreme cases, a hinge, since in this version there are two wheels. Perhaps the author did not have this, or did not want to break the style. He made like a pendulum from pipes. This unit made it possible to horizontally rotate the trailer axle and fold when turning. And made parts on the bike frame, the ability to swing up and down.
Motorized bike trailer  Motorized bike trailer Motorized bike trailer  Motorized bike trailer I made the boards from fiberboard, the higher, the more bulk cargo can be transported.
Motorized bike trailer  Motorized bike trailer The work is coming to an end. It's time to preserve the metal and give the product a presentation.
Motorized bike trailer I installed a box, to turn on the electric motors I installed two 350W controllers and two shoulder drivers up to 48V. Fitted battery 12A/hour, size and interior lighting. He pulled the wires to the throttle and that's it.
Motorized bike trailer  Motorized bike trailer Motorized bike trailer  Motorized bike trailer Motorized bike trailer  Motorized bike trailer You can ride on pedals, or you can without them. You can put on the load, or you can disconnect the trailer and ride the bike as before, because nothing was done with it
Motorized bike trailer Motorized bike trailer Motorized bike trailer Well, if dear readers want to make something unusual out of a bicycle for travel, here is an option for you. The device can ride both on pedals and on an electric motor, it is great to swim, there is a charge from the sun and there is a place for an overnight stay for two people inside. You also need to be able to rest!
Motorized bike trailer

Source:

usamodelkina.ru

Show More

Related Articles

Leave a Reply

Your email address will not be published. Required fields are marked *

Back to top button