DIY

How to make a whale shark with a movable torso

How to make a whale shark with a movable body  How to make a whale shark with a movable body Considering this product of the master under the nickname Garage Avenger, at first glance it is difficult to believe that the shark is made of wood.
As a rule, such products are made of soft linden, but the master uses pine.
And yet, at the end of the article there will be a video with the process of making such a tiger shark. Typically, these videos are boring and monotonous, but not this time. Those who like to laugh can safely rewind the video, for example, to 3:29. Do not forget to write in the comments your impressions about the product, and about the entertainment of the master-)))
Tools and materials:
– Pine block;
– Joiner's glue;
-Acryl;
-Furniture hinges;
-Stain;
-Leska;
-Acrylic white paint;
-Fugovalny machine;
-Clamps;
– Pencil;
-Projector;
-Nozhovka;
-Angle;
-Band saw;
-Glue gun;
-USHM;
-Circular saw;
-Band-grinding machine;
-Engraver;
-Emery paper;
-Two black beads;
-Oil with wax;
-Latters;
Step One: Preparing the Material
The master uses a pine log to make the shark's body. First, you need to cut it off and align all the planes. Then cut into equal lengths, half a meter. And finally, you need to glue the three bars together. Pay attention to the last photo. The master says that the growth rings should be in contact with each other. This, in the future, will prevent warping of the product.
How to make a whale shark with a movable body < a href = "https://usamodelkina.ru/uploads/posts/2021-01/1611837429_1-3.jpg" rel = "prettyPhoto"> How to make a whale shark with a movable body How to make a whale shark with a movable body Step second: projection
To transfer the contour of the tiger shark to the workpiece, the master uses a rather original method. He is using a projector. The image is projected onto the workpiece and outlined along the contour. The image is projected in two planes, from the side and from above. We will call them the X and Y axis.
If you don't have a projector, you can use the more traditional method. Namely, print the template on paper.
How to make a whale shark with a movable body How to make a whale shark with a movable body Step third: sawing
In order for the shark sculpture to move, you need to divide it into segments. First, the master marks it out, draws straight transverse lines. When marking, the location of the tail and fins should be taken into account, the lines should not pass along them.
After marking, the workpiece is sawn.
How to make a whale shark with a movable body < a href = "https://usamodelkina.ru/uploads/posts/2021-01/1611837421_1-8.jpg" rel = "prettyPhoto"> How to make a whale shark with a movable body Step four: trimming the X and Y axes
Next, you need to cut out each segment along the lines of the X axis. Then glue the cut sections with hot glue in place and cut along the lines of the Y axis. Then peel off the previously glued pieces.
 How to make a whale shark with a movable body How to make a whale shark with a movable body < a href = "https://usamodelkina.ru/uploads/posts/2021-01/1611837423_1-11.jpg" rel = "prettyPhoto"> How to make a whale shark with a movable body Step five: spacers
For further processing it is necessary to glue shark segments again. But not just glue, but glue the spacers between them.
The master uses acrylic 4 mm thick as spacers. You can also use, for example, plywood as spacers.
These spacers are temporary and you will need to remove them later. To make it easier to do this, he drilled holes in the center of the spacers of 30 mm, 20 mm and 10 mm, depending on the size of the spacer. The spacer is installed on the segment, then in the center, in the hole, hot melt is applied and the second segment is installed on top.
How to make a whale shark with a movable body  How to make a whale shark with a movable body How to make a whale shark with a movable body Step six: grinding
Next, the master displays the shape of the product using the angle grinder. The fins should be installed flat.
How to make a whale shark with a movable body < a href = "https://usamodelkina.ru/uploads/posts/2021-01/1611837368_1-16.jpg" rel = "prettyPhoto"> How to make a whale shark with a movable body Step six: tail and fins
Next, the master cuts out the details of the tail and fins. In places of installation (on the body of the shark) cuts grooves. Glues the details.
How to make a whale shark with a movable body  How to make a whale shark with a movable body How to make a whale shark with a movable body  How to make a whale shark with a movable body How to make a whale shark with a movable body  How to make a whale shark with a movable body How to make a whale shark with a movable body  How to make a whale shark with a movable body Step Seven: Detailing, Sanding and Loops
Next, sand the shark by hand with sandpaper. With the help of an engraver, he draws lines along the back and the transition of fins and tail to the body. Makes holes for the eyes.
How to make a whale shark with a movable body How to make a whale shark with a movable body  How to make a whale shark with a movable body How to make a whale shark with a movable body Grinding the shark again with 240 grit sandpaper. Wet the surface with water and sand again. Moistening with water lifts the wood fibers and after sanding the surface becomes smooth. After polishing, glues beady eyes.
How to make a whale shark with a movable body  How to make a whale shark with a movable body How to make a whale shark with a movable body Now we need to divide the shark into segments.
 How to make a whale shark with a movable body Finally, you need to screw small canopies along the central centerline. Assemble the shark, check the movements, if necessary adjust the location of the loops.
How to make a whale shark with a movable body Step eight: painting
Next, you need to apply the appropriate coloring to the shark.
For the top of the whale shark, he used Liberon ebony stain. For the abdomen of a whale shark I used oil with wax Osmo “Snow White”.
After the coating had dried, I started painting.
The master did not use any special paint. He found an old can of semi-white gloss paint for window frames, which he diluted with a little water. An image of a whale shark from the Internet was taken as a sample for coloring.
After painting, I sprayed several layers of varnish on the surface.
How to make a whale shark with a movable body  How to make a whale shark with a movable body How to make a whale shark with a movable body  How to make a whale shark with a movable body Everything is ready, now it remains to fix the line and hang it from the ceiling.
 How to make a whale shark with a movable body And finally the promised video.

Source:

usamodelkina.ru

Show More

Related Articles

Leave a Reply

Your email address will not be published. Required fields are marked *

Back to top button