DIY

Tool stand

Hello everyone today I will tell you how to make a stand for a tool
 Stand for the tool

Let's start

It is necessary

< ol type = "1">

  • 1-plywood
  • 2-mesh
  • 3-screws
  • 4 -clips for polypropylene
  • 5-End caps for 110 pipe
  • 6-pipe
  • 7-Transition 50-70 < br>
  • 8-piece of Styrofoam or Styrofoam
  • Getting Started

    Take plywood and mesh – connect
    Stand for the tool To store the tool on this, you need bite the wire in the right place and thus get the hook
    Stand for the tool  Stand for the tool The hooks can be folded in different ways
    Stand for the tool Then we take the clips and fix them there where we need, we get the habitat of screwdrivers and hammers
     Stand for the tool Tool stand Stand for the tool Next, you need to determine the hardware. To do this, we take plugs for 110 pipes, clips for 25 pipes and 25 pipes. We carry out the following operations
    Stand for the tool Stand for tool  Stand for the tool Now you need to define the screwdriver, for this we take the transition 50 to 70, make a slot for the button and attach it to the stand.
    Stand for the tool By the way, if you make slots for the belt, you will get an excellent holster
    This stand is wonderful because you can attach anything to it. For example, there is foam – attach the foam
    Stand for tool That's all, all right and for now
    Stand for the tool  Stand for the tool prettyg” class = “aligncenter” alt = “Stand for the tool” src = “https://usamodelkina.ru/uploads/posts/2021-02/1613476987_polish_20210215_193354269.jpg”/>  Stand for the tool

    Source:

    usamodelkina.ru

    Show More

    Related Articles

    Leave a Reply

    Your email address will not be published. Required fields are marked *

    Back to top button