DIY

Double bed made of a profile pipe and chipboard

Double bed made of profile pipe and chipboard  Double bed made of profile pipe and chipboard Double bed made of a profile pipe and chipboard В In this article, a master with the nickname style_the_code will share with us his experience in making a large double bed.
The final price for a bed was about $ 350 including the mattress, which is about half the price of a similar bed in the store.
This project is great if you want to practice welding and it took the craftsman about 3 days.
Tools and materials: -Welding inverter 140A; -Angle grinder; -Electric drill; -Cordless impact drill; -Cut-off discs of an angle grinder; -Float discs for angle grinders; -Metal drills; -Rack for a drill; -M6 bolts; -Screws M3.5 16 mm; -Marker; -Clamps; -Welding magnets;
-Profile pipe 3X3 cm;
-Plastic plugs on pipes;
-Laminated chipboard;
-Metal brackets;
-Paint;
-Print;
-Painting brush;
Step one: design
First, the master designed the bed in Sketchup. You can download the project file here.
Double bed made of a profile pipe and chipboard Step two: short crossbars
Short slats will be located along the bed and will connect the chipboard to the frame.
The pipes have a protective layer of oil and must be washed off. Then he marks out according to the size, cuts off.
Double bed from profile pipes and chipboard Double bed made of a profile pipe and chipboard < a href = "https://usamodelkina.ru/uploads/posts/2021-02/1613666812_1-5.jpg" rel = "prettyPhoto"> Double bed from a profile pipe and chipboard Double bed made of a profile pipe and chipboard < a href = "https://usamodelkina.ru/uploads/posts/2021-02/1613666822_1-7.jpg" rel = "prettyPhoto"> Double bed made of profile pipe and chipboard Grinds the edges and brushes the workpieces with a wire brush.
Double bed made of a profile pipe and chipboard < a href = "https://usamodelkina.ru/uploads/posts/2021-02/1613666857_1-9.jpg" rel = "prettyPhoto"> Double bed from a profile pipe and chipboard Brackets are welded to the ends of the blanks. They have one larger and 4 smaller holes on each side. The larger hole is great for M6 bolts to hold the base in place, smaller holes for attaching the base to the outer frame.
 Double bed made of a profile pipe and chipboard Double bed made of a profile pipe and chipboard < a href = "https://usamodelkina.ru/uploads/posts/2021-02/1613666781_1-12.jpg" rel = "prettyPhoto"> Double bed made of profile pipe and chipboard Double bed made of a profile pipe and chipboard < a href = "https://usamodelkina.ru/uploads/posts/2021-02/1613666763_1-14.jpg" rel = "prettyPhoto"> Double bed from a profile pipe and chipboard Double bed made of a profile pipe and chipboard < a href = "https://usamodelkina.ru/uploads/posts/2021-02/1613666764_1-16.jpg" rel = "prettyPhoto"> Double bed made of profile pipe and chipboard Step three: long beams
Long beams are first prepared, just like short ones, cleaning, cutting and brackets at the ends.
Double bed from a profile pipe and chipboard  Double bed made of profile pipe and chipboard Double bed from a profile pipe and chipboard  Double bed made of profile pipe and chipboard Then you need to mark and drill fastening holes in the pipes. Holes are drilled in the centers of all three pipes and 2/3 from the edges.
Double bed made of a profile pipe and chipboard Double bed made of a profile pipe and chipboard < a href = "https://usamodelkina.ru/uploads/posts/2021-02/1613666847_1-23.jpg" rel = "prettyPhoto"> Double bed made of profile pipe and chipboard Double bed made of a profile pipe and chipboard < a href = "https://usamodelkina.ru/uploads/posts/2021-02/1613666803_1-25.jpg" rel = "prettyPhoto"> Double bed made of profile pipe and chipboard Double bed made of a profile pipe and chipboard < a href = "https://usamodelkina.ru/uploads/posts/2021-02/1613666777_1-27.jpg" rel = "prettyPhoto"> Double bed made of profile pipe and chipboard
Step four: support legs
To transfer the weight to the floor, he adds two legs to each long support. The legs are made the same as the crossbars, but the brackets do not need to be welded.
Double bed made of a profile pipe and chipboard Double bed made of a profile pipe and chipboard < a href = "https://usamodelkina.ru/uploads/posts/2021-02/1613666769_1-30.jpg" rel = "prettyPhoto"> Double bed from a profile pipe and chipboard Now we need to weld the legs to the long bars. Distance – 1/3 from each edge.
Double bed made of a profile pipe and chipboard < a href = "https://usamodelkina.ru/uploads/posts/2021-02/1613666854_1-32.jpg" rel = "prettyPhoto"> Double bed made of a profile pipe and chipboard Double bed made of a profile pipe and chipboard < a href = "https://usamodelkina.ru/uploads/posts/2021-02/1613666829_1-34.jpg" rel = "prettyPhoto"> Double bed made of profile pipe and chipboard Step five: painting
To prevent the metal from rusting, it primes the parts, and then paints .
Double bed from a profile pipe and chipboard  Double bed from a profile pipe and chipboard Double bed from a profile pipe and chipboard  Double bed made of profile pipe and chipboard Double bed from a profile pipe and chipboard  Double bed from a profile pipe and chipboard Double bed from a profile pipe and chipboard After the paint has dried, plastic plugs must be installed on the ends of the legs. This will protect the floor from damage.
Double bed made of a profile pipe and chipboard Step sixth: assembly
The rest of the bed is made of laminated chipboard 16 mm thick. The parts were cut to size in advance. To increase the strength, the sides and the front are glued in half to 32 mm, and the edge is applied to both parts in one strip.
To attach the sides to the headboard, the craftsman used two-piece corner brackets, which can later be removed if ever needed disassemble and move the bed.
Since there were no assembly instructions, he placed the side piece over the headboard, added a bracket where it should go, and marked the location of the holes.
 Double bed made of a profile pipe and chipboard Double bed from a profile pipe and chipboard Then I drilled the mounting holes and fixed the brackets with self-tapping screws. Then he screwed the sides to the headboard.
Double bed made of a profile pipe and chipboard < a href = "https://usamodelkina.ru/uploads/posts/2021-02/1613666796_1-46.jpg" rel = "prettyPhoto"> Double bed made of a profile pipe and chipboard Double bed made of a profile pipe and chipboard < a href = "https://usamodelkina.ru/uploads/posts/2021-02/1613666830_1-48.jpg" rel = "prettyPhoto"> Double bed made of profile pipe and chipboard Double bed made of a profile pipe and chipboard Metal the feet of the base are approximately 60 cm from the edges. And because of this, the bed can tilt to the side, if, for example, sit on the edge.
To prevent this, the master made two support legs from chipboard. The legs are angled and attached to the back of the bed.
Double bed made of a profile pipe and chipboard < a href = "https://usamodelkina.ru/uploads/posts/2021-02/1613666804_1-51.jpg" rel = "prettyPhoto"> Double bed made of profile pipe and chipboard Double bed made of a profile pipe and chipboard < a href = "https://usamodelkina.ru/uploads/posts/2021-02/1613666770_1-53.jpg" rel = "prettyPhoto"> Double bed made of profile pipe and chipboard Double bed made of a profile pipe and chipboard < a href = "https://usamodelkina.ru/uploads/posts/2021-02/1613666854_1-55.jpg" rel = "prettyPhoto"> Double bed made of profile pipe and chipboard Then the metal frame is screwed on. At this stage, you do not need to tighten the nuts to the end.
Double bed made of a profile pipe and chipboard < a href = "https://usamodelkina.ru/uploads/posts/2021-02/1613666862_1-57.jpg" rel = "prettyPhoto"> Double bed made of a profile pipe and chipboard Double bed made of a profile pipe and chipboard < a href = "https://usamodelkina.ru/uploads/posts/2021-02/1613666820_1-59.jpg" rel = "prettyPhoto"> Double bed made of profile pipe and chipboard Before you finally attach the frame to the base of the bed, you need to check the corners and the location of the sidewalls at the same level.
Then screws the back of the bed and finally tightens the fasteners.
Double bed from profile pipes and chipboard Double bed made of a profile pipe and chipboard < a href = "https://usamodelkina.ru/uploads/posts/2021-02/1613666847_1-62.jpg" rel = "prettyPhoto"> Double bed made of profile pipe and chipboard Double bed made of a profile pipe and chipboard < a href = "https://usamodelkina.ru/uploads/posts/2021-02/1613666860_1-64.jpg" rel = "prettyPhoto"> Double bed made of profile pipe and chipboard Double bed made of a profile pipe and chipboard < a href = "https://usamodelkina.ru/uploads/posts/2021-02/1613666775_1-66.jpg" rel = "prettyPhoto"> Double bed made of profile pipe and chipboard Step seven: base plate and mattress
The base plates are made of chipboard. Holes were made in the slabs to ventilate the mattress.
Double bed from a profile pipe and chipboard  Double bed made of profile pipe and chipboard Now it remains to put the mattress on the bed and everything is ready.
Double bed made of a profile pipe and chipboard  Double bed made of profile pipe and chipboard  Double bed made of a profile pipe and chipboard The whole process of making the bed can be seen in the video.

Source:

usamodelkina.ru

Show More

Related Articles

Leave a Reply

Your email address will not be published. Required fields are marked *

Back to top button