All other parts in this assembly are items that he found in crates from his workshop. The base is made of an old piece of wood fence, the body is made of a trimmed copper tube, and the switch is made of an old lock.
Tools and materials:
-Copper tube 65 mm;
-Copper tube – 15mm; < br> -Old castle;
-G4 lamp base; -LED lamp G4 200 lumens; -Adapter DC 9 V;
-Limit switch; -Soldering accessories;
-Old bicycle camera;
– DC connector;
-Various old parts;
Step one: foundation
First you need to make the base for the lamp. Having cut off the block, the master sanded it and rounded the edges.
I drilled a 32 mm hole in the center of the bar. In the side walls, opposite each other, I drilled a hole. One hole for the switch, the other for the power cord.
Step two: lamp body design
Then he polishes the copper parts and covers them with a protective acrylic varnish.
I found a wheel in the old trash, it fits perfectly into the design.
Step three: inner rack
Further, a nut is pressed into the smaller tube. The wheel is put on the end of the tube with the nut. Bolt the tube to the wheel.
Step four: switch
The switch will be integrated into the old door catch. Part of the mechanism was removed so that the switch could be installed inside, and adapted so that when the handle was turned, the mechanism pressed on the limit switch plate.
Then he fixed the switch inside the lock. So that it does not close to the body, I laid a plastic plate.
Step five: large tube
Drills three small holes around the circumference of the wheel. Cuts threads, fixes the tube with screws. Then he solders four brackets in the upper part of the tube.
Step six: lampshade
The lampshade is made of a piece from an old lamp and a metal strip. I cut the strip to size and bent it. Drilled holes and fastened two strips together. I screwed a part from the lamp.
I screwed the second part to the bottom of the strip.
Step seven: plafond
Plafond is a bottle from forfeits.
To keep it inside the rack, the master cut a tape from an old bicycle tube.
Wrapped the bottle around the bottle and placed the bottle inside the rack.
Step eight: covering the base
For a beautiful look, the master covered the base with a stain.
< a href = "https://usamodelkina.ru/uploads/posts/2021-02/1614180842_1-65.jpg" rel = "prettyPhoto"> Step Nine: Building
Then proceeds to the assembly of the lamp.
Installs the switch.
Installs the connector.
Mounts and connects the cartridge.
Secures the wheel. Sets the LED.
Installs the stand, lampshade and plafond.
Everything is ready, and the video shows the whole process of assembling the table lamp.